Description

Electronic Component Model: EM6353BX2SP3B-2.9+ is a high-speed CMOS synchronous graphics DRAM with a capacity of 16 Mbits. It is internally configured as a dual 256K x 32 DRAM with a synchronous interface. The SGRAM is designed for fast access time and high clock rates, making it suitable for graphics applications.

Specifications and features

• Fast access time from clock: 5/5/5.5/6.5/7.5 ns
• Fast clock rate: 183/166/143/125/100 MHz
• Fully synchronous operation
• Internal pipelined architecture
• Dual internal banks (256K x 32-bit x 2-bank)
• Programmable Mode and Special Mode registers
• CAS# Latency: 1, 2, or 3
• Burst Length: 1, 2, 4, 8, or full page
• Burst Type: interleaved or linear burst
• Burst-Read-Single-Write
• Load Color or Mask register
• Burst stop function
• Individual byte controlled by DQM0-3
• Block write and write-per-bit capability
• Auto Refresh and Self Refresh
• 2048 refresh cycles/32ms
• Single +3.3V±0.3V power supply
• Interface: LVTTL
• JEDEC 100-pin Plastic package
• QFP (body thickness=2.8mm)
• TQFP1.4 (body thickness=1.4mm)
• TQFP1.0 (body thickness=1.0mm)

Application Scenarios

This Electronic Component Model is commonly used in graphics applications that require high-speed and high-capacity memory. It can be used in graphics cards, gaming consoles, digital signage, and other multimedia devices.

Comparison

• High-speed access and clock rates
• Dual internal banks for improved performance
• Programmable Mode and Special Mode registers for customization
• Supports various burst lengths and types
• Auto Refresh and Self Refresh capabilities for power management

• Requires a +3.3V±0.3V power supply
• Limited body thickness options for the package