Description

The P10-10R-D is a 1M-bit (128K-byte) Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction. The P10-10R-D is designed to allow either single Sector at a time or full chip erase operation. The P10-10R-D can be configured to protect part of the memory as the software protected mode. The device can sustain a minimum of 100K program/erase cycles on each sector.

Specifications and features

• Product Category: IC Chips

• Single power supply operation

• Full voltage range: 2.7-3.6 volt

• 1 M-bit Serial Flash

• 1 M-bit/128 K-byte/512 pages

• 256 bytes per programmable page

• High performance

• 100MHz clock rate

• Low power consumption

• 5 mA typical active current

• 1 μA typical power down current

• Uniform Sector Architecture

• Four 32-Kbyte sectors

Application Scenarios

The P10-10R-D is suitable for various electronic devices and applications that require 1M-bit Serial Flash memory with advanced write protection mechanisms and high performance. It can be used in consumer electronics, industrial equipment, communication devices, and more.

Comparison

- Single power supply operation

- High performance with a 100MHz clock rate

- Low power consumption with 5 mA typical active current and 1 μA typical power down current

- Advanced write protection mechanisms

- Can be configured to protect part of the memory as the software protected mode

- Limited memory capacity of 1M-bit/128K-byte