Description

The MX25L4006EM1I-12G is a CMOS 4,194,304 bit serial Flash memory, which is configured as 524,288 x 8 internally. It features a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus. The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). SPI access to the device is enabled by CS# input.

Specifications and features

- Serial Peripheral Interface (SPI) compatible -- Mode 0 and Mode 3
- 4,194,304 x 1 bit structure
- 128 Equal Sectors with 4K byte each
- 8 Equal Blocks with 64K byte each
- Single Power Supply Operation
- Latch-up protected to 100mA from -1V to Vcc +1V
- Low Vcc write inhibit is from 1.5V to 2.5V
- High Performance: Fast access time, program time, and erase time
- Low Power Consumption: Low active read, programming, and erase current; low standby current; deep power-down mode
- Minimum 100,000 erase/program cycles

Application Scenarios

The MX25L4006EM1I-12G is commonly used in electronic devices that require non-volatile memory for data storage, such as portable devices, consumer electronics, automotive applications, and industrial equipment.

Comparison

- High performance with fast access, program, and erase time
- Low power consumption
- Compatible with SPI
- Multiple erase and program cycles

- Requires a 2.7 to 3.6 volt power supply for operations