Description

The SFI0402-060E0R20P-LF is an electronic component model in the category of IC chips. It is a 16 Mbit, 3.0 Volt-only Flash memory with an organization of 2,097,152 bytes or 1,048,576 words. The device is available in three different packages: 48-ball Fine-pitch BGA (0.8 mm pitch), 64-ball Fortified BGA (1.0 mm pitch), and 48-pin TSOP. It supports both word-wide data (x16) on DQ15–DQ0 and byte-wide data (x8) on DQ7–DQ0. This component can be programmed in-system with a standard 3.0 volt VCC supply, without needing a separate 12.0 V VPP or 5.0 VCC for write or erase operations. It is also compatible with standard EPROM programmers.

Specifications and features

• Memory capacity: 16 Mbit
• Operating voltage: 3.0 V
• Organization: 2,097,152 bytes or 1,048,576 words
• Packages available: 48-ball Fine-pitch BGA (0.8 mm pitch), 64-ball Fortified BGA (1.0 mm pitch), 48-pin TSOP
• Supports word-wide data (x16) on DQ15–DQ0 and byte-wide data (x8) on DQ7–DQ0

Application Scenarios

The SFI0402-060E0R20P-LF electronic component model is widely used in various electronic devices and systems that require a 16 Mbit Flash memory with a 3.0 V operating voltage. It can be used in applications such as embedded systems, digital cameras, portable media players, and networking equipment.

Comparison

1. High memory capacity of 16 Mbit.

2. Operates at a low voltage of 3.0 V.

3. Supports both word-wide data (x16) and byte-wide data (x8).

4. Available in multiple package options for flexible integration.

1. Requires a standard 3.0 volt VCC supply, but does not support higher voltage options.

2. Programming or erasing operations must be done in-system or with standard EPROM programmers.