**SSD1301 is a single-chip CMOS OLED/PLED driver with controller for

organic/polymer light emitting diode dot-matrix graphic display system. SSD1301 consists of 132 high voltage/current driving output pins for driving 132 segments and 64 commons plus 1 icon line driving common. This IC is designed for Common Cathode type OLED panel.**

SSD1301 displays data directly from its internal 132x65 bit Graphic Display Data RAM (GDDRAM). Data/Commands are sent from general MCU through a pin selectable 6800-/8080-series compatible Parallel Interface or Serial Peripheral Interface or I2 C Interface.
SSD1301 embeds a contrast control function and an on-chip oscillator for reducing the number of external components.

FEATURES

Support max. 132 x (64+1) matrix panel
Power supply to logic system, 2.4V-3.5V
Power supply to OLED system, 7.0V-16.5V
Segment output maximum current: 400uA
Common sink maximum current: 50mA
Half range and full range current mode selection
Low current sleep mode (<5.0uA)
External current reference control by external resistor
256 steps contrast control on monochrome passive OLED panel
On-Chip Oscillator
Programmable Frame Rate
Solomon Systech Limited’s Proprietary OLED Driving Scheme
8-bit 6800-series Parallel Interface, 8-bit 8080-series Parallel Interface, Serial Peripheral Interface and I2 C Interface
Embedded 132 x 65 bit SRAM display buffer
Row re-mapping and Column re-mapping
Vertical scrolling
Support Partial display
Wide range of operating temperatures: -30 to 85 °C