Description

Electronic Component Model: XCF08PFS48C is a memory configuration PROMs specifically designed for FPGAs. It operates within a voltage range of 1.71 to 3.6 V and has a flash write voltage range of 1.71 to 3.6 V. The temperature range for this component is -40 to 105°C. It features an ARM Cortex-M4 core with DSP instructions, delivering up to 100 MHz and 1.25 Dhrystone MIPS per MHz. It has a program flash memory capacity of up to 512 KB on devices without FlexMemory, along with 128 KB of RAM. It also includes various interfaces such as serial programming interface (EzPort) and FlexBus external bus interface. The component supports multiple clocks including crystal oscillators, a multi-purpose clock generator, and a 32 kHz crystal oscillator. It also includes system peripherals like a memory protection unit, DMA controller, watchdog monitors, and low-leakage wakeup unit. The component offers security and integrity features such as a hardware CRC module and a 128-bit unique identification (ID) number per chip. It supports human-machine interface with a low-power hardware touch sensor interface (TSI) and general-purpose input/output. The component also includes analog modules like SAR ADCs, programmable gain amplifier, DAC, analog comparators, and voltage reference. It features various timers including a programmable delay block, motor control/general purpose/PWM timer, and quadrature decoder/general purpose timer. It also supports communication interfaces like USB, Controller Area Network (CAN), SPI, I2C, UART, Secure Digital host controller (SDHC), and I2S module.

Specifications and features

- Operating Characteristics: Voltage range: 1.71 to 3.6 V, Flash write voltage range: 1.71 to 3.6 V, Temperature range (ambient): -40 to 105°C

- Performance: Up to 100 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz

- Memories and memory interfaces: Up to 512 KB program flash memory on non FlexMemory devices, Up to 128 KB RAM, Serial programming interface (EzPort), FlexBus external bus interface

- Clocks: 3 to 32 MHz crystal oscillator, 32 kHz crystal oscillator, Multi-purpose clock generator

- System peripherals: 10 low-power modes to provide power optimization based on application requirements, Memory protection unit with multi-master protection, 16-channel DMA controller, supporting up to 64 request sources, External watchdog monitor, Software watchdog, Low-leakage wakeup unit

- Security and integrity modules: Hardware CRC module to support fast cyclic redundancy checks, 128-bit unique identification (ID) number per chip

- Human-machine interface: Low-power hardware touch sensor interface (TSI), General-purpose input/output

- Analog modules: Two 16-bit SAR ADCs, Programmable gain amplifier (up to x64) integrated into each ADC, 12-bit DAC, Three analog comparators (CMP) containing a 6-bit DAC and programmable reference input, Voltage reference

- Timers: Programmable delay block, Eight-channel motor control/general purpose/PWM timer, Two 2-channel quadrature decoder/general purpose timers, Periodic interrupt timers, 16-bit low-power timer, Carrier modulator transmitter, Real-time clock

- Communication interfaces: USB full-/low-speed On-the-Go controller with on chip transceiver, Two Controller Area Network (CAN) modules, Three SPI modules, Two I2C modules, Five UART modules, Secure Digital host controller (SDHC), I2S module

Application Scenarios

This electronic component model, XCF08PFS48C, can be used in various applications including FPGA development, embedded systems, microcontroller projects, industrial automation, robotics, automotive electronics, consumer electronics, and communication devices. Its wide range of memory and interface options make it suitable for different types of devices requiring advanced memory configuration and functionality.

Comparison

- Wide voltage range and temperature range for flexible operation in different environments

- High-performance ARM Cortex-M4 core with DSP instructions for efficient processing

- Ample program flash memory and RAM for storage and data processing

- Multiple clocks and timers for precise timing and synchronization

- Comprehensive system peripherals and security modules for enhanced functionality and protection

- Human-machine interface and analog modules for versatile input/output and sensor integration

- Support for various communication interfaces for seamless connectivity with other devices

- May require advanced programming and integration skills

- Higher cost compared to simpler memory configurations