Description

Electronic Component Model: SM1103-17CB is a plastic package IC chip with features like Underwriters Laboratory Flammability Classification 94V-O, suitable for surfacemounted applications. The chip has a glass passivated junction and lowinductance surge resistance. It has a fast response time, with a typical less than 1.0ps from 0 volts to V(BR) for unidirectional and 5.0ns for bidirectionaltypes. The SM1103-17CB has a 400W peak pulse capability with a 10/1000μs waveform and a repetition rate (dutycycle) of 0.01%. It is designed for devices with V(BR) ≥ 10V, with ID typically less than 1.0 μA. The chip is also guaranteed for high temperature soldering of 250℃/10 seconds at terminals.

Specifications and features

· Plastic package has Underwriters Laboratory Flammability Classification 94V-O · For surfacemounted applications · Glass passivated junction · Lowinductance surge resistance · Fast response time: typical less than 1.0ps from 0 voltstoV(BR) for unidirectional AND 5.0ns for bidirectionaltypes · 400W peak pulse capability with a 10/1000μs waveform, repetition rate (dutycycle): 0.01% · For devices with V(BR) ≥ 10V, ID are typically less than 1.0 μA · High temperature soldering guaranteed: 250℃/10 seconds at terminals

Application Scenarios

The SM1103-17CB IC chip is designed for surfacemounted applications. It can be used in various electronic devices and circuits that require lowinductance surge resistance and fast response time. The chip's high temperature soldering capabilities make it suitable for applications where heat resistance is important.

Comparison

- Plastic package with Underwriters Laboratory Flammability Classification 94V-O increases safety. - Glass passivated junction improves the chip's performance and durability. - Lowinductance surge resistance ensures reliable operation in high voltage conditions. - Fast response time allows for quick signal processing. - Repetition rate of 0.01% may not be suitable for applications requiring higher duty cycles. - Limited to devices with V(BR) ≥ 10V and ID typically less than 1.0 μA.