Description

The S29GL128M10FAIR10 is a 3.0 Volt-only Page Mode Flash Memory with a capacity of 256 Megabit, 128 Megabit, 64 Megabit, and 32 Megabit. It is manufactured using 0.23 µm MirrorBit Process Technology. The device can be programmed either in the host system or in standard EPROM programmers.

Specifications and features

General Description

The S29GL256/128/064/032M family of devices are 3.0 V single power Flash memory manufactured using 0.23 µm MirrorBit technology. The S29GL256M is a 256†Mbit, organized as 16,777,216 words or 33,554,432 bytes. The S29GL128M is a 128 Mbit, organized as 8,388,608 words or 16,777,216 bytes. The S29GL064M is a 64 Mbit, organized as 4,194,304 words or 8,388,608 bytes. The S29GL032M is a 32 Mbit, organized as 2,097,152 words or 4,194,304 bytes. Depending on the model number, the devices have an 8-bit wide data bus only, 16-bit wide data bus only, or a 16-bit wide data bus that can also function as an 8-bit wide data bus by using the BYTE# input.

Distinctive Characteristics

Architectural Advantages:
- Single power supply operation (3V)
- Manufactured on 0.23 µm MirrorBit process technology
- Secured Silicon Sector region with a permanent, secure identification through an 8-word/16-byte random Electronic Serial Number
- Flexible sector architecture for different models
- Compatibility with JEDEC standards for pinout and software compatibility
- 100,000 erase cycles typical per sector
- 20-year data retention typical

Performance Characteristics

- High performance with 90 ns access time (128 Mb, 64 Mb, 32 Mb), 100 ns access time (256 Mb)
- Low power consumption at typical values (3.0 V, 5 MHz)
- Package options available: 40-pin TSOP, 48-pin TSOP, 56-pin TSOP, 64-ball Fortified BGA, 48-ball fine-pitch BGA, 63-ball fine-pitch BGA

Software & Hardware Features

- Software features include Program Suspend & Resume, Erase Suspend & Resume, Data# polling & toggle bits, CFI (Common Flash Interface) compliance, and Unlock Bypass Program command
- Hardware features include Sector Group Protection, Temporary Sector Unprotect, WP#/ACC input for accelerated programming time, hardware reset input (RESET#), and Ready/Busy# output (RY/BY#)

Application Scenarios

The S29GL128M10FAIR10 is commonly used in IC Chips for electronic components.

Comparison

- Single power supply operation
- Secured Silicon Sector region for secure identification
- Flexible sector architecture for different models
- Compatibility with JEDEC standards
- High performance with low access time
- Low power consumption
- Various package options available

- None identified