Description

The 8823CPNG6F10 is an Electronic Component Model that belongs to the IC Chips Category. It is a multifunctional TFT Flat Panel Controller that supports built-in 3D Video Decoder, triple ADCs, dual PIP, and 16-bit OSD. It is capable of producing high-quality images and video, making it an excellent addition to a multi-purpose in-car LCD display system.

Specifications and features

Features

• High-quality 3D comb NTSC/PAL/SECAM video decoder
• Triple high-speed RGB ADCs
• Scaler, bit-mapped OSD, and triple DACs
• Image enhancement functions like Black and White Stretch, favorite color enhancement, etc
• Supports panoramic scaling for conversion to wide-screen display format
• CVBS, S-video, analog RGB, and digital YCbCr/RGB inputs.
• Built-in timing controller and analog RGB output for both digital and analog panel types
• LVDS type panel support

ANALOG VIDEO DECODER

• NTSC (M, 4.43) and PAL (B, D, G, H, I, M, N, N combination), PAL (60), SECAM with automatic format detection
• Two 10-bit ADCs and analog clamping circuit
• Fully programmable static gain or automatic gain control for the Y or CVBS channel
• Programmable white peak control for the Y or CVBS channel
• Software selectable analog inputs allow either composite or S-video input
• High-quality motion adaptive 3D comb filter for both NTSC and PAL with concurrent 3D noise reduction
• PAL delay line for color phase error correction
• Image enhancement with 2D dynamic peaking and CTI
• Digital sub-carrier PLL for accurate color decoding
• Digital horizontal PLL and Advanced synchronization processing for VCR playback and weak signal performance
• Programmable hue, brightness, saturation, contrast, sharpness
• High-quality horizontal and vertical filtered down scaling with arbitrary scale-down ratio

ANALOG RGB INPUTS

• Triple high-speed 10-bit ADCs with clamping and programmable gain amplifier
• SOG and H/V sync support for YPbPr or RGB input
• Built-in line-locked PLL with sync separator
• Supports analog input resolution up to 1080i or WXGA

DUAL DIGITAL INPUTS SUPPORT

• Dual-channel digital inputs support with the following combinations:
• 1 channel 18/16-bit inputs and 1 channel 8-bit inputs
• 1 channel 24-bit digital RGB/YCbCr inputs
• Supports both 656 and 601 video formats
• Allows connection to an external HDMI receiver

BUILT-IN MICROCONTROLLER

• Built-in 8052 MCU up to 72MHz clock
• Built-in code cache memory to enhance CPU performance
• Supports Single/Dual/Quad IO SPI Flash with 24-bit/32-bit addressing
• System programming through UART
• Supports SPI DMA Read/Write to OSD memory
• Supports I2C Master interface with GPIO
• Supports two UART interfaces up to 115200bps and 8 bytes RX FIFO
• Supports IR receiver and interrupt output
• Supports 24-bit contiguous addressing mode

Application Scenarios

The TW8823C is ideal for creating a multi-purpose in-car LCD display system. Additionally, it can be used in other applications that require high-quality image and video processing, such as entertainment systems, gaming consoles, and portable displays.

Comparison

• Supports both digital and analog panel types with its built-in timing controller and analog RGB output
• High-quality motion adaptive 3D comb filter for both NTSC and PAL with concurrent 3D noise reduction
• Supports panoramic scaling for conversion to wide-screen display format
• Dual-channel digital inputs support with the following combinations: 1 channel 18/16-bit inputs and 1 channel 8-bit inputs, 1 channel 24-bit digital RGB/YCbCr inputs
• LVDS type panel support

• Does not support HDMI directly
• Can be relatively complex and expensive to implement