EP4CE6F17C8N - Brand New Intel / Altera FPGAs (Field Programmable Gate Array)
-
Description
The EP4CE6F17C8N is a Field Programmable Gate Array (FPGA) that belongs to the Cyclone IV FPGA device family. This family of devices is known for providing low-cost and low-power FPGAs. The Cyclone IV family of devices is aimed at fulfilling high-volume, cost-sensitive applications. With the addition of the Cyclone IV GX, the family now offers a transceiver variant which enables system designers to meet increasing bandwidth requirements while simultaneously lowering costs.
Specifications and features
The main features of the EP4CE6F17C8N are:
Low-cost, low-power FPGA fabric:
- 6K to 150K logic elements
- Up to 6.3 Mb of embedded memory
- Up to 360 18 × 18 multipliers for DSP processing intensive applications
- Protocol bridging applications for under 1.5 W total power
- Cyclone IV GX devices offer up to eight high-speed transceivers that provide:
- Data rates up to 3.125 Gbps
- 8B/10B encoder/decoder
- 8-bit or 10-bit physical media attachment (PMA) to physical coding sublayer (PCS) interface
- Byte serializer/deserializer (SERDES)
- Word aligner
- Rate matching FIFO
- TX bit slipper for Common Public Radio Interface (CPRI)
- Electrical idle
- Dynamic channel reconfiguration allowing you to change data rates andprotocols on-the-fly
- Static equalization and pre-emphasis for superior signal integrity
- 150 mW per channel power consumption
- Flexible clocking structure to support multiple protocols in a single transceiver block
- Cyclone IV GX devices offer dedicated hard IP for PCI Express (PIPE) (PCIe) Gen 1:
- ×1, ×2, and ×4 lane configurations
- End-point and root-port configurations
- Up to 256-byte payload
- One virtual channel
- 2 KB retry buffer
- 4 KB receiver (Rx) buffer
- Cyclone IV GX devices offer a wide range of protocol support:
- PCIe (PIPE) Gen 1 ×1, ×2, and ×4 (2.5 Gbps)
- Gigabit Ethernet (1.25 Gbps)
- CPRI (up to 3.072 Gbps)
- XAUI (3.125 Gbps)
- Triple rate serial digital interface (SDI) (up to 2.97 Gbps)
- Serial RapidIO (3.125 Gbps)
- Basic mode (up to 3.125 Gbps)
- V-by-One (up to 3.0 Gbps)
- DisplayPort (2.7 Gbps)
- Serial Advanced Technology Attachment (SATA) (up to 3.0 Gbps)
- OBSAI (up to 3.072 Gbps)
- Up to 532 user I/Os
- LVDS interfaces up to 840 Mbps transmitter (Tx), 875 Mbps Rx
- Support for DDR2 SDRAM interfaces up to 200 MHz
- Support for QDRII SRAM and DDR SDRAM up to 167 MHz
- Up to eight phase-locked loops (PLLs) per device
- Offered in commercial and industrial temperature gradesApplication Scenarios
The EP4CE6F17C8N FPGA is suitable for a wide range of applications. It can be used in protocol bridging applications that require under 1.5 W power. It is also ideal for applications that demand high-level DSP processing, as it contains up to 360 18 × 18 multipliers. With Cyclone IV GX, it can be used in a variety of protocols such as PCIe (PIPE) Gen 1, Gigabit Ethernet, and many more, making it an excellent fit for applications that require high-speed communication. Additionally, the FPGA offers LVDS interfaces up to 840 Mbps transmitter (Tx), 875 Mbps Rx, making it a perfect fit for applications that require data transmission at a high speed.
Comparison
Advantages- Low cost and low power consumption
- 6K to 150K logic elements
- Up to 360 18 × 18 multipliers for DSP processing intensive applications
- Up to eight high-speed transceivers that provide data rates up to 3.125 Gbps and a wide range of protocol support
- Up to 532 user I/Os and LVDS interfaces up to 840 Mbps transmitter (Tx), 875 Mbps Rx, suitable for applications that require data transmission at a high speed
- Flexible clocking structure to support multiple protocols in a single transceiver block
- Support for DDR2 SDRAM interfaces up to 200 MHz and support for QDRII SRAM and DDR SDRAM up to 167 MHz
- Up to eight phase-locked loops (PLLs) per device
- Offered in commercial and industrial temperature grades.
Disadvantages- Not suitable for applications that require high FPGA fabric performance and more logic elements in the device
- The EP4CE6F17C8N is not ideal for applications that require low-power consumption, unlike the other members of the Cyclone IV FPGA device family
-
Similar parts: 3140 , Click to view
-
Datasheet
-
Shopping guide
Delivery period:
- - Will ship out in 2-3 days
- - DHL Express: 3-7 business days
- - DHL eCommerce: 12-22 business days
- - FedEx International Priority: 3-7 business days
- - EMS: 10-15 business days
Shipping fee:
- - Automatic Email notification (above 5 times)
- - View in your order page
Shipping option:
DHL, FedEx, EMS, SF Express, and Registered Air MailShipping tracking:
- - Automatic Email notification (above 5 times)
- - View in your order page
How to Buy:
- - In-stock, Add to cart > Check out > Submit order > Complete payment >Delivery.
- - Inquiry, Add to inquiry sheet/Submit bom/inquire file/Send email us > Quote > Place order > Complete payment >Delivery.
- View more
Payment:
- - Paypal,Credit Card includes Visa, Master, American Express.
- - Wire transfer, include Local bank transfer.
- - Western Union.
- View more
- Datasheet: Download EP4CE6F17C8N
- Chipdatas Part: CD87-EP4CE6F17C8N
- Warehouse: China, Hong Kong
- Dispatch: Within 24 hours
- Free Shipping: Yes
- Prority Shipping: Yes, 3-5 days
- Last Updated: 2024/09/20 06:15 +0800
-
- Full Refund if you don't receive your order
- Full or Partial Refund , If the item is not as described
-
The fee is charged according to the rule of PayPal.
-
The fee is charged according to the rule of PayPal.
-
Western Union charge US$0.00 banking fee.
-
We recommend to use bank transfer for large orders to save on handling fees.
-
DHL(www.dhl.com)
$40 limited time offer. -
UPS(www.ups.com)
$40 limited time offer. -
FedEx(www.fedex.com)
$40 limited time offer. -
Registered Mail(www.singpost.com)
Free shipping without minimum order.