Description

The TCET110./ TCET2100/ TCET4100 consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4-lead up to 16-lead plastic dual inline package.
The elements are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for highest safety requirements.

Features

Approvals:
● BSI: BS EN 41003, BS EN 60095 (BS 415), BS EN 60950 (BS 7002), Certificate number 7081 and 7402
● FIMKO (SETI): EN 60950, Certificate number 11027
● Underwriters Laboratory (UL) 1577 recognized, file number E-76222 – Double Protection
● CSA (C-UL) 1577 recognized file number E- 76222 - Double Protection
● VDE 0884, Certificate number 115667

VDE 0884 related features:

● Rated impulse voltage (transient overvoltage) VIOTM = 8 kV peak
● Isolation test voltage (partial discharge test voltage) Vpd = 1.6 kV
● Rated isolation voltage (RMS includes DC) VIOWM = 600 VRMS (848 V peak)
● Rated recurring peak voltage (repetitive) VIORM = 600 VRMS
● Creepage current resistance according to VDE 0303/IEC 112 Comparative Tracking Index: CTI ≥ 175
● Thickness through insulation ≥ 0.75 mm
● Internal creepage distance > 4 mm

General features:

● CTR offered in 9 groups
● Isolation materials according to UL94-VO
● Pollution degree 2 (DIN/VDE 0110 / resp. IEC 664)
● Climatic classification 55/100/21 (IEC 68 part 1)
● Special construction: Therefore, extra low coupling capacity of typical 0.2 pF, high Common Mode Rejection
● Low temperature coefficient of CTR
● G = Leadform 10.16 mm; provides creepage distance > 8 mm, for TCET2100/ TCET4100 optional; suffix letter ‘G’ is not marked on the optocoupler
● Coupling System U

Applications

Circuits for safe protective separation against electrical shock according to safety class II (reinforced isolation):
- For appl. class I – IV at mains voltage ≤ 300 V
- For appl. class I – III at mains voltage ≤ 600 V according to VDE 0884, table 2, suitable for: