Description

The A5366 is a low-current BiCMOS circuit providing all of the required features for a photoelectric type smoke detector. This device can be used with an infrared photoelectric chamber to sense scattered light from smoke particles. A networking capability allows as many as 50 units to be interconnected so that if any unit senses smoke all units will sound an alarm. Special features are incorporated in the design to facilitate calibration and testing of the finished detector. The device is recognized by Underwriters Laboratories for use in smoke alarms that comply with Standard UL217.

Features and Benefits

▪ Low average standby current for long battery life
▪ Interconnect up to 50 detectors
▪ Piezoelectric horn driver
▪ Low battery detection (all internal)
▪ Chamber sensitivity test and alarm
▪ Power-on reset (POR)
▪ Internal timer and control for reduced sensitivity mode
▪ Built-in circuits to reduce false triggering
▪ 6 to 12 V operating range
▪ ESD protection circuitry on all pins
▪ Temporal Horn Pattern, per UL217, NFPA72, and ISO8201
▪ UL Recognized for UL217 applications, per file #S2113