Product Details

__

[ Fremont Micro Devices ]

DESCRIPTION

The FT24C02A is 2048 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 256 words of 8 bits (1 byte) each. The devices are fabricated with proprietary advanced CMOS process for low power and low voltage applications. These devices are available in standard 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead TSSOP, 8-lead DFN and 5-lead SOT-23/TSOT-23 packages. A standard 2-wire serial interface is used to address all read and write functions. Our extended VCC range (1.8V to 5.5V) devices enables wide spectrum of applications.

FEATURES

■ Low voltage and low power operations:
● FT24C02A: VCC = 1.8V to 5.5V, Industrial temperature range (-40℃ to 85℃).
■ Two Versions of FT24C02A:
● FT24C02A-5xx: Low cost with 5 valid pins. Suitable for most application except those with more than one EEPROM on the same IIC Bus. Details in the “Device Addressing” section.
● FT24C02A-Uxx: 8 valid pins suitable for all application.
■ Maximum Standby current < 1µA (typically 0.02µA and 0.06µA @ 1.8V and 5.5V respectively).
■ 16 bytes page write mode.
■ Partial page write operation allowed.
■ Internally organized: 256 × 8 (2K).
■ Standard 2-wire bi-directional serial interface.
■ Schmitt trigger, filtered inputs for noise protection.
■ Self-timed programming cycle (5ms maximum).
■ 1 MHz (5V), 400 kHz (1.8V, 2.5V, 2.7V) Compatibility.
■ Automatic erase before write operation.
■ Write protect pin for hardware data protection.
■ High reliability: typically 1, 000,000 cycles endurance.
■ 100 years data retention.
■ Standard 8-pin PDIP/SOIC/TSSOP/DFN and 5-pin SOT-23/TSOT-23 Pb-free packages.