General Description

With its unique array of configurable blocks, PSoC® 5 is a true system-level solution providing microcontroller unit (MCU), memory, analog, and digital peripheral functions in a single chip. The CY8C52 family offers a modern method of signal acquisition, signal processing, and control with high accuracy, high bandwidth, and high flexibility. Analog capability spans the range from thermocouples (near DC voltages) to ultrasonic signals. The CY8C52 family can handle dozens of data acquisition channels and analog inputs on every GPIO pin. The CY8C52 family is also a high-performance configurable digital system with some part numbers including interfaces such as USB, multimaster I2C, and controller area network (CAN), a communications protocol. In addition to communication interfaces, the CY8C52 family has an easy to configure logic array, flexible routing to all I/O pins, and a high- performance 32-bit ARM® Cortex™-M3 microprocessor core. Designers can easily create system level designs using a rich library of prebuilt components and boolean primitives using PSoC Creator™, a hierarchical schematic design entry tool. The CY8C52 family provides unparalleled opportunities for analog and digital bill of materials integration while easily accommodating last minute design changes through simple firmware updates.

Features

■ 32-bit ARM Cortex-M3 CPU core
□ DC to 40 MHz operation
□ Flash program memory, up to 256 KB, 100,000 write cycles, 20-year retention and multiple security features
□ Up to 64 KB SRAM memory
□ 2-KB electrically erasable programmable read-only memory (EEPROM) memory, 1 million cycles, and 20 years retention
□ 24-channel direct memory access (DMA) with multilayer AMBA high-performance bus (AHB) bus access
• Programmable chained descriptors and priorities
• High bandwidth 32-bit transfer support
■ Low voltage, ultra low power
□ Operating voltage range: 2.7 V to 5.5 V
□ High efficiency boost regulator from 1.8-V input to 5.0-V output
□ 5 mA at 6 MHz
□ Low power modes including:
• 3-µA sleep mode with real time clock (RTC) and low-voltage detect (LVD) interrupt
• 1-µA hibernate mode with RAM retention
■ Versatile I/O system
□ 28 to 72 I/Os (62 GPIOs, eight SIOs, two USBIOs[1])
□ Any GPIO to any digital or analog peripheral routability
□ LCD direct drive from any GPIO, up to 46 × 16 segments
□ CapSense® support from any GPIO[2]
□ 1.2 V to 5.5 V I/O interface voltages, up to four domains
□ Maskable, independent IRQ on any pin or port
□ Schmitt trigger transistor-transistor logic (TTL) inputs
□ All GPIOs configurable as open drain high/low, pull up/down, High-Z, or strong output
□ 25 mA sink on SIO
■ Digital peripherals
□ 20 to 24 programmable logic device (PLD) based universal digital blocks (UDBs)
□ Full CAN 2.0b 16 RX, 8 TX buffers[1]
□ Full-Speed (FS) USB 2.0 12 Mbps using internal oscillator[1]
□ Four 16-bit configurable timer, counter, and PWM blocks
□ Library of standard peripherals
• 8-, 16-, 24-, and 32-bit timers, counters, and PWMs
• SPI, UART, and I2C
• Many others available in catalog
□ Library of advanced peripherals
• Cyclic redundancy check (CRC)
• Pseudo random sequence (PRS) generator
• Local interconnect network (LIN) bus 2.0
• Quadrature decoder
■ Analog peripherals (2.7 V ≤ VDDA ≤ 5.5 V)
□ 1.024 V ±1% internal voltage reference across –40 °C to +85 °C (128 ppm/°C)
□ Successive approximation register (SAR) analog-to-digital converter (ADC), 12-bit at 1 Msps
□ One 8-bit, 8-Msps current DAC (IDAC) or 1-Msps voltage DAC (VDAC)
□ Two comparators with 95-ns response time
□ CapSense support
■ Programming, debug, and trace
□ Serial wire debug (SWD) and single-wire viewer (SWV) interfaces
□ Cortex-M3 flash patch and breakpoint (FPB) block
□ Cortex-M3 data watchpoint and trace (DWT) generates data trace information
□ Cortex-M3 Instrumentation Trace Macrocell (ITM) can be used for printf-style debugging
□ DWT and ITM blocks communicate with off-chip debug and trace systems via the SWV interface
□ Bootloader programming supportable through I2C, SPI, UART, USB, and other interfaces
■ Precision, programmable clocking
□ 3 to 24 MHz internal oscillator over full temperature and voltage range
□ 4 to 25 MHz crystal oscillator for crystal PPM accuracy
□ Internal PLL clock generation up to 40 MHz
□ 32.768 KHz watch crystal oscillator
□ Low power internal oscillator at 1, 33, and 100 kHz
■ Temperature and packaging
□ –40 °C to +85 °C degrees industrial temperature
□ 68-pin QFN and 100-pin TQFP package options