Description

The Electronic Component Model MB2011SS1A01-CA is a push switch manufactured by NKK SWITCHES. It is designed with distinctive characteristics that set it apart from other switches in its category. The switch features a guide interlocked with the actuator block, which prevents window locking and maintains correct plunger alignment for contact stability. It also employs an over-center actuator mechanism, reducing sparking and increasing operating life in AC circuits. The high torque bushing construction prevents rotation or separation from the frame during installation. The switch is also available with a splashproof option (D3 and B3 bushing codes), featuring an o-ring within the bushing and one under the face nut to protect from splashed, sprayed, or spilled liquids. The high insulating barriers formed in the molded diallyl phthalate case increase isolation of circuits in multipole devices. Additionally, the switch has prominent external insulating barriers that enhance insulation resistance and dielectric strength. The epoxy sealed terminals prevent the entry of solder flux and other contaminants. With the frame clinched to the case above the base and terminals, it provides a dielectric strength of 1,500V.

Specifications and features

- Guide interlocked with actuator block

- Over-center actuator mechanism

- High torque bushing construction

- Splashproof option available

- High insulating barriers in molded case

- Prominent external insulating barriers

- Epoxy sealed terminals

- 1,500V dielectric strength

Application Scenarios

The Electronic Component Model MB2011SS1A01-CA push switch can be used in various applications, including:

• - Industrial control panels
• - Automotive electronics
• - Home appliances
• - Audio equipment
• - Medical devices

Comparison

- Prevents window locking and maintains plunger alignment

- Diminishes sparking and increases operating life in AC circuits

- Prevents rotation or separation from frame during installation

- Protects from splashed, sprayed, or spilled liquids

- Increases isolation of circuits in multipole devices

- Enhances insulation resistance and dielectric strength

- Prevents entry of solder flux and other contaminants

- Provides 1,500V dielectric strength

Currently, there are no known disadvantages of the Electronic Component Model MB2011SS1A01-CA push switch.