Description

The EPM7192GC160-2 is an electronic component in the IC Chips product category. It belongs to the MAX 7000 family of high-density, high-performance PLDs (Programmable Logic Devices). This component is based on Altera's second-generation MAX architecture and is fabricated with advanced CMOS technology. It provides 600 to 5,000 usable gates, in-system programmability (ISP), pin-to-pin delays as fast as 5 ns, and counter speeds of up to 175.4 MHz.

Specifications and features

- High-performance, EEPROM-based programmable logic devices (PLDs) based on second-generation MAX® architecture.
- 5.0-V in-system programmability (ISP) through the built-in IEEE Std. 1149.1 Joint Test Action Group (JTAG) interface available in MAX 7000S devices.
- ISP circuitry compatible with IEEE Std. 1532.
- Includes 5.0-V MAX 7000 devices and 5.0-V ISP-based MAX 7000S devices.
- Built-in JTAG boundary-scan test (BST) circuitry in MAX 7000S devices with 128 or more macrocells.
- Complete EPLD family with logic densities ranging from 600 to 5,000 usable gates.
- 5-ns pin-to-pin logic delays with up to 175.4-MHz counter frequencies (including interconnect).
- PCI-compliant devices available.
- Open-drain output option in MAX 7000S devices.
- Programmable macrocell flipflops with individual clear, preset, clock, and clock enable controls.
- Programmable power-saving mode for a reduction of over 50% in each macrocell.
- Configurable expander product-term distribution, allowing up to 32 product terms per macrocell.
- 44 to 208 pins available in plastic J-lead chip carrier (PLCC), ceramic pin-grid array (PGA), plastic quad flat pack (PQFP), power quad flat pack (RQFP), and 1.0-mm thin quad flat pack (TQFP) packages.
- Programmable security bit for protection of proprietary designs.
- 3.3-V or 5.0-V operation.
- MultiVoltTM I/O interface operation, allowing devices to interface with 3.3-V or 5.0-V devices (MultiVolt I/O operation is not available in 44-pin packages).
- Pin compatible with low-voltage MAX 7000A and MAX 7000B devices.
- Enhanced features available in MAX 7000E and MAX 7000S devices:
- Six pin- or logic-driven output enable signals.
- Two global clock signals with optional inversion.
- Enhanced interconnect resources for improved routability.
- Fast input setup times provided by a dedicated path from I/O pin to macrocell registers.
- Programmable output slew-rate control.
- Software design support and automatic place-and-route provided by Altera's development system for Windows-based PCs and Sun SPARCstation, and HP 9000 Series 700/800 workstations.
- Additional design entry and simulation support provided by EDIF 200 and 300 netlist files, library of parameterized modules (LPM), Verilog HDL, VHDL, and other interfaces to popular EDA tools from manufacturers such as Cadence, Exemplar Logic, Mentor Graphics, OrCAD, Synopsys, and VeriBest.
- Programming support:
- Altera's Master Programming Unit (MPU) and programming hardware from third-party manufacturers program all MAX 7000 devices.
- The BitBlasterTM serial download cable, ByteBlasterMVTM parallel port download cable, and MasterBlasterTM serial/universal serial bus (USB) download cable program MAX 7000S devices.

Application Scenarios

The EPM7192GC160-2 electronic component can be used in various applications such as:
- Programmable logic controllers (PLCs).
- Communication equipment.
- Industrial automation systems.
- Data processing.
- Consumer electronics.
- Automotive electronics.
- Medical equipment.
- Aerospace systems.
- And more.

Comparison

- High-density and high-performance PLD capable of handling advanced tasks.
- In-system programmability (ISP) allows for convenient updates and modifications.
- Wide range of logic densities and package options to suit different application needs.
- Enhanced features available in certain models for improved functionality and performance.
- Software design support and compatibility with popular EDA tools for efficient development.
- Programming support provided by Altera and third-party manufacturers.
- Suitable for various applications across different industries.

- Limited compatibility in terms of MultiVoltTM I/O operation in certain packages.
- The size and complexity of the component may not be suitable for certain low-power or cost-sensitive applications.
- Requires programming and configuration expertise for optimal utilization of its capabilities.