Description

The ML60852A is a general purpose Universal Serial Bus (USB) device controller. It provides a USB serial interface engine, USB transceiver, FIFOs, control/status registers, application interface circuit, and oscillation circuit, making it easy to implement a USB system. The ML60852A supports four types of data transfer - control transfer, bulk transfer, interrupt transfer, and isochronous transfer - and supports five or six endpoints.

Specifications and features

- USB1.1 compliant - Supports full-speed (12 Mbps) - Supports four types of transfer; control transfer, bulk transfer, interrupt transfer, and isochronous transfer - Endpoints: 5 to 6 endpoints - Built-in FIFO for data storage - A two-layer configuration of FIFO for each of EP1, EP2, EP4, and EP5 - 8/16 bit DMA supported (EP1, EP2, EP4, and EP5) - Intelligent Serial Interface Engine (SIE) - Supports bus-powered device - Built-in USB transceiver circuit - Ta = -20 to +80 °C - VCC=3.0 to 3.6 V - Interface with 5 V circuit is possible. (Input: 5 V tolerant, output: TTL) - Built-in 12 MHz /6 MHz oscillation circuit - Package options: 44-pin plastic TQFP, 56-pin plastic LGA

Application Scenarios

The ML60852A can be used in various scenarios that require a USB device controller. It is suitable for applications that need USB serial interface capabilities, such as data transfer, communication, and control.

Comparison

- Supports various types of data transfer - Built-in FIFO for efficient data storage - Intelligent Serial Interface Engine (SIE) for improved performance - Supports bus-powered devices and low-power mode for energy efficiency - Limited endpoint options (only 5 to 6 endpoints are supported) - Temperature range is limited to -20 to +80 °C