Description

The SAF-XC164CS-16F20F is a high-performance microcontroller from the Infineon XC166 Family. It extends the functionality and performance of the C166 Family with its advanced features, including a high-performance 16-bit CPU, high-speed instructions execution, enhanced IO capabilities, and various on-chip memory modules. With its powerful CPU performance and extensive peripheral functionality, this microcontroller is suitable for a wide range of applications.

Specifications and features

- High Performance 16-bit CPU with 5-Stage Pipeline

- 25 ns Instruction Cycle Time at 40 MHz CPU Clock (Single-Cycle Execution)

- 1-Cycle Multiplication (16 ×16 bit), Background Division (32 / 16 bit) in 21 Cycles

- Enhanced Boolean Bit Manipulation Facilities

- Zero-Cycle Jump Execution

- Additional Instructions to Support HLL and Operating Systems

- Register-Based Design with Multiple Variable Register Banks

- Fast Context Switching Support with Two Additional Local Register Banks

- 16 Mbytes Total Linear Address Space for Code and Data

- 1024 Bytes On-Chip Special Function Register Area (C166 Family Compatible)

- 16-Priority-Level Interrupt System with upto 75 Sources, Sample-Rate down to 50 ns

- 8-Channel Interrupt-Driven Single-Cycle Data Transfer Facilities via Peripheral Event Controller (PEC), 24-Bit Pointers Cover Total Address Space

- Clock Generation via on-chip PLL (factors 1:0.15 … 1:10), or via Prescaler (factors 1:1 … 60:1)

- On-Chip Memory Modules

- 2 Kbytes On-Chip Dual-Port RAM (DPRAM)

- 2/4 Kbytes On-Chip Data SRAM (DSRAM)

- 2 Kbytes On-Chip Program/Data SRAM (PSRAM)

- 64/128 Kbytes On-Chip Program Memory (Flash Memory or Mask ROM)

- On-Chip Peripheral Modules

- 14-Channel A/D Converter with Programmable Resolution(10-bit or 8-bit) and Conversion Time (down to 2.55 µs or 2.15 µs)

- Two 16-Channel General Purpose Capture/Compare Units (12 Input/Output Pins)

- Capture/Compare Unit for flexible PWM Signal Generation (CAPCOM6) (3/6 Capture/Compare Channels and 1 Compare Channel)

- Multi-Functional General Purpose Timer Unit with 5 Timers

- Two Synchronous/Asynchronous Serial Channels (USARTs)

- Two High-Speed-Synchronous Serial Channels

- On-Chip TwinCAN Interface (Rev. 2.0B active) with 32 Message Objects (Full CAN/Basic CAN) on Two CAN Nodes, and Gateway Functionality

- On-Chip Real Time Clock

- Idle, Sleep, and Power Down Modes with Flexible Power Management

- Programmable Watchdog Timer and Oscillator Watchdog

- Up to 12 Mbytes External Address Space for Code and Data

- Programmable External Bus Characteristics for Different Address Ranges

- Multiplexed or Demultiplexed External Address/Data Buses

- Selectable Address Bus Width

- 16-Bit or 8-Bit Data Bus Width

- Four Programmable Chip-Select Signals

- Up to 79 General Purpose I/O Lines, partly with Selectable Input Thresholds and Hysteresis

- On-Chip Bootstrap Loader

- Supported by a Large Range of Development Tools like C-Compilers, Macro-Assembler Packages, Emulators, Evaluation Boards, HLL-Debuggers, Simulators, Logic Analyzer Disassemblers, Programming Boards

- On-Chip Debug Support via JTAG Interface

- 100-Pin Green TQFP Package, 0.5 mm (19.7 mil) pitch (RoHS compliant)

Application Scenarios

The SAF-XC164CS-16F20F microcontroller is suitable for a wide range of applications including industrial automation, consumer electronics, automotive systems, and more. Its high CPU performance, extensive peripheral support, and on-chip memory modules make it ideal for demanding tasks in these industries.

Comparison

- High-performance 16-bit CPU with fast instruction execution

- Extensive peripheral modules for versatile functionality

- On-chip memory modules for efficient data storage and execution

- Programmable external bus and I/O lines for flexible hardware connections

- Supported by a range of development tools for easy programming and debugging

- Requires knowledge of C-Compilers and programming languages for effective utilization