Description

The ATTINY10-TSHR is a low-power CMOS 8-bit microcontroller based on the AVR® enhanced RISC architecture. This model executes powerful instructions in a single clock cycle and achieves throughputs close to 1 MIPS per MHz. It provides a wide range of features and is highly customizable to optimize power consumption versus processing speed. This microcontroller is designed for use in a variety of applications, such as consumer electronics, industrial automation, and automotive.

Specifications and features

• High Performance, Low Power AVR® 8-Bit Microcontroller
• Advanced RISC Architecture
• 54 Powerful Instructions
• Most Single Clock Cycle Execution
• 16 x 8 General Purpose Working Registers
• Fully Static Operation
• Up to 12 MIPS Throughput at 12 MHz
• Non-volatile Program and Data Memories
• 512/1024 Bytes of In-System Programmable Flash Program Memory
• 32 Bytes Internal SRAM
• Flash Write/Erase Cycles: 10,000
• Data Retention: 20 Years at 85°C / 100 Years at 25°C
• Peripheral Features
• QTouch® Library Support for Capacitive Touch Sensing (1 Channel)
• One 16-bit Timer/Counter with Prescaler and Two PWM Channels
• Programmable Watchdog Timer with Separate On-chip Oscillator
• 4-channel, 8-bit Analog to Digital Converter (ATtiny5/10, only)
• On-chip Analog Comparator
• Special Microcontroller Features
• In-System Programmable (at 5V, only)
• External and Internal Interrupt Sources
• Low Power Idle, ADC Noise Reduction, and Power-down Modes
• Enhanced Power-on Reset Circuit
• Programmable Supply Voltage Level Monitor with Interrupt and Reset
• Internal Calibrated Oscillator
• I/O and Packages
• Four Programmable I/O Lines
• 6-pin SOT and 8-pad UDFN
• Operating Voltage: 1.8 - 5.5V
• Programming Voltage: 5V
• Speed Grade:
• 0 - 4 MHz @ 1.8 - 5.5V
• 0 - 8 MHz @ 2.7 - 5.5V
• 0 - 12 MHz @ 4.5 - 5.5V
• Industrial and Extended Temperature Ranges
• Low Power Consumption
• Active Mode: 200μA at 1MHz and 1.8V
• Idle Mode: 25μA at 1MHz and 1.8V
• Power-down Mode: <0.1μA at 1.8V

Application Scenarios

The ATTINY10-TSHR microcontroller can be used in a variety of applications, including consumer electronics, industrial automation, and automotive. It is suitable for smaller-scale projects where low power consumption and high performance are desired.

Comparison

• High-performance microcontroller with low power consumption
• Wide operating voltage range
• In-system programmable
• Non-volatile program and data memories
• Multiple special microcontroller features, including low power idle, ADC noise reduction, and power-down modes

• Limited number of I/O lines
• Some features only available on specific models (e.g. 4-channel, 8-bit Analog to Digital Converter only available on ATTINY5/10)