Description

The XC2C32A-6QFG32C is a programmable logic device (PLD) and a member of the Infineon XC2000 family of microcontrollers. It provides high-performance functionalities and can handle up to 66 million instructions per second, delivering high CPU performance combined with enhanced I/O capabilities and optimized peripherals which can be adapted to the application's requirements in a flexible way. With various on-chip memory modules such as program Flash, program RAM, and data RAM, it offers 16 Mbytes total linear address space for code and data. This component has a 100-pin Green LQFP package, 0.5 mm (19.7 mil) pitch.

Specifications and features

• High-Performance 16-bit CPU with 5-Stage Pipeline
• 15 ns Instruction Cycle Time at 66 MHz CPU Clock (Single-Cycle Execution)
• 1-Cycle 32-bit Addition and Subtraction with 40-bit result
• 1-Cycle Multiplication (16 × 16 bit)
• 1-Cycle Multiply-and-Accumulate (MAC) Instructions
• Background Division (32 / 16 bit) in 21 Cycles
• Enhanced Boolean Bit Manipulation Facilities
• Zero-Cycle Jump Execution
• Additional Instructions to Support HLL and Operating Systems
• Register-Based Design with Multiple Variable Register Banks
• Fast Context Switching Support with Two Additional Local Register Banks
• 16-Priority-Level Interrupt System with up to 87 Sources, Selectable External Inputs for Interrupt Generation and Wake-Up, Sample-Rate down to 15 ns
• 8-Channel Interrupt-Driven Single-Cycle Data Transfer Facilities via Peripheral Event Controller (PEC), 24-Bit Pointers Cover Total Address Space
• Clock Generation from Internal or External Clock Sources, via on-chip PLL or via Prescaler
• On-Chip Memory Modules
• 1 Kbyte On-Chip Stand-By RAM (SBRAM)
• 2 Kbytes On-Chip Dual-Port RAM (DPRAM)
• 16 Kbytes On-Chip Data SRAM (DSRAM)
• Up to 64 Kbytes On-Chip Program/Data SRAM (PSRAM)
• Up to 768 Kbytes On-Chip Program Memory (Flash Memory)
• On-Chip Peripheral Modules
• Two Synchronizable A/D Converters with a total of 16 Channels, 10-bit Resolution, Conversion Time down to 1.2 µs, Optional Data Preprocessing (Data Reduction, Range Check)
• 16-Channel General Purpose Capture/Compare Unit (CAPCOM2)
• Up to four Capture/Compare Units for flexible PWM Signal Generation (CCU6x)
• Multi-Functional General Purpose Timer Unit with 5 Timers
• Six Serial Interface Channels to be used as UART, LIN, High-Speed Synchronous Channel (SPI/QSPI), IIC Bus Interface (10-bit addressing, 400 kbit/s), IIS Interface
• On-Chip MultiCAN Interface (Rev. 2.0B active) with up to 128 Message Objects (Full CAN/Basic CAN) on up to 5 CAN Nodes and Gateway Functionality
• On-Chip Real Time Clock
• Up to 12 Mbytes External Address Space for Code and Data
• Programmable External Bus Characteristics for Different Address Ranges
• Multiplexed or Demultiplexed External Address/Data Buses
• Selectable Address Bus Width
• 16-Bit or 8-Bit Data Bus Width
• Four Programmable Chip-Select Signals
• Single Power Supply from 3.0 V to 5.5 V
• Power Reduction Modes with Flexible Power Management
• Programmable Watchdog Timer and Oscillator Watchdog
• Up to 75 General Purpose I/O Lines
• On-Chip Bootstrap Loader

Application Scenarios

The XC2C32A-6QFG32C is suitable for various industrial applications, such as automotive, energy, and healthcare. It can be used in electronic control units of vehicles, energy conversion systems, medical monitoring and imaging devices, and more.

Comparison

• High-performance functionalities with up to 66 million instructions per second
• Multiple memory modules available
• Flexible I/O capabilities and optimized peripherals
• Clock generation from internal or external sources

• May be more complex to use compared to simpler logic devices
• May require more advanced programming skills
• Higher cost compared to simpler logic devices