RTL8138P

General Description

The Realtek RTL8130 is a highly integrated and cost-effective single-chip Fast Ethernet controller that provides 32-bit performance, PCI bus master capability, and full compliance with IEEE 802.3u 100Base-T specifications and IEEE 802.3x Full Duplex Flow Control. It also supports Advanced Configuration Power management Interface (ACPI), PCI power management for modern operating systems that is capable of Operating System Directed Power Management (OSPM) to achieve the most efficient power management.

Features:

● 160 pins QFP
● Integrated Fast Ethernet MAC, Physical chip and transceiver in one chip
● All drivers of RTL8130 are compatible to RTL8139A
● 10 Mb/s and 100 Mb/s operation
● Supports 10 Mb/s and 100 Mb/s N-way Autonegotiation operation l PCI local bus single-chip Fast Ethernet controller
◇ Compliant to PCI Revision 2.2
◇ Supports PCI clock 16.75MHz-40MHz
◇ Supports PCI target fast back-to-back transaction
◇ Provides PCI bus master data transfers and PCI memory space or I/O space mapped data transfers of RTL8130s operational registers
◇ Supports ACPI, PCI power management
● Support AUI & MII interfaces
● Medium auto-detect priority: UTP > MII in UTP+MII application or UTP > AUI in UTP+AUI application. UTP+MII+AUI application is not supported.
● Auto detect the status of cable connection
● Support redundant link capability by UTP+MII, or UTP+AUI for fault-tolerant applications
● Supports up to 128K bytes Boot ROM interface for both EPROM and Flash memory
● Supports 50MHz OSC as the internal clock source. The frequency deviation of either crystal or OSC must be within 50 PPM.
● Supports Wake-On-LAN function and remote wake-up (Magic packet, LinkChg and Microsoft® wake-up frame)
● Supports 4 Wake-On-LAN (WOL) signals (active high, active low, positive pulse, and negative pulse)
● Supports auxiliary power-on internal reset, to be ready for remote wake-up when main power still remains off
● Includes a programmable, PCI burst size and early tx/rx threshold.
● Supports a 32-bit general-purpose timer with the external PCI clock as clock source, to generate timer-interrupt
● Contains two large (2Kbyte) independent receive and transmit FIFO’s
● Uses 93C46 (64*16-bit EEPROM) to store resource configuration, ID parameter.
● Supports LED pins for various network activity indications
● Supports digital and analog loopback capability on both ports
● Half/Full duplex capability
● Supports Full Duplex Flow Control (IEEE 802.3x)