ADSP-2188MKST-300

GENERAL DESCRIPTION

The ADSP-2188M is a single-chip microcomputer optimized for digital signal processing (DSP) and other high speed numeric processing applications.
The ADSP-2188M combines the ADSP-2100 family base architecture (three computational units, data address generators and a program sequencer) with two serial ports, a 16-bit internal DMA port, a byte DMA port, a programmable timer, Flag I/O, extensive interrupt capabilities, and on-chip program and data memory.

FEATURES

Performance
• 12.5 ns Instruction Cycle Time @ 2.5 Volts (internal), 75 MIPS Sustained Performance
• Single-Cycle Instruction Execution
• Single-Cycle Context Switch
• 3-Bus Architecture Allows Dual Operand Fetches in Every Instruction Cycle
• Multifunction Instructions
• Powerdown Mode Featuring Low CMOS Standby Power Dissipation with 200 CLKIN Cycle Recovery from
Powerdown Condition
• Low Power Dissipation in Idle Mode

Integration

• ADSP-2100 Family Code Compatible (easy to use algebraic syntax), with Instruction Set Extensions
• 256K Bytes of On-Chip RAM, Configured as 48K Words On-Chip Program Memory RAM and 56K Words
On-Chip Data Memory RAM
• Dual Purpose Program Memory for Both Instruction and Data Storage
• Independent ALU, Multiplier/Accumulator, & Barrel Shifter Computational Units
• Two Independent Data Address Generators
• Powerful Program Sequencer Provides Zero Overhead Looping Conditional Instruction Execution
• Programmable 16-Bit Interval Timer with Prescaler
• 100-Lead LQFP

System Interface

• Flexible I/O structure allows 2.5V or 3.3V operation; all inputs tolerate up to 3.6V regardless of mode
• 16-Bit Internal DMA Port for High Speed Access to on-Chip Memory (Mode Selectable)
• 4 MByte Memory Interface for Storage of Data Tables & Program Overlays (Mode Selectable)
• 8-Bit DMA to Byte Memory for Transparent Program and Data Memory Transfers (Mode Selectable)
• I/O Memory Interface with 2048 Locations Supports Parallel Peripherals (Mode Selectable)
• Programmable Memory Strobe & Separate I/O Memory Space Permits “Glueless” System Design
• Programmable Wait State Generation
• Two Double-Buffered Serial Ports with Companding Hardware and Automatic Data Buffering
• Automatic Booting of On-Chip Program Memory from Byte-Wide External Memory, e.g., EPROM, or
Through Internal DMA Port
• Six External Interrupts
• 13 Programmable Flag Pins Provide Flexible System Signaling
• UART Emulation through Software SPORT Reconfiguration
• ICE-Port™ Emulator Interface Supports Debugging in Final Systems