LT1362CS

DESCRIPTION

The LT1361/LT1362 are dual and quad low power high speed operational amplifiers with outstanding AC and DC performance. The amplifiers feature much lower supply current and higher slew rate than devices with comparable bandwidth. The circuit topology is a voltage feedback amplifier with matched high impedance inputs and the slewing performance of a current feedback amplifier. The high slew rate and single stage design provide excellent settling characteristics which make the circuit an ideal choice for data acquisition systems. Each output drives a 500Ω load to ±13V with ±15V supplies and a 150Ω load to ±3.2V on ±5V supplies. The amplifiers are stable with any capacitive load making them useful in buffer or cable driving applications.

FEATURES

■ 50MHz Gain Bandwidth
■ 800V/µs Slew Rate
■ 5mA Maximum Supply Current per Amplifier
■ Unity-Gain Stable
■ C-LoadTM Op Amp Drives All Capacitive Loads
■ 9nV/√Hz Input Noise Voltage
■ 1mV Maximum Input Offset Voltage
■ 1µA Maximum Input Bias Current
■ 250nA Maximum Input Offset Current
■ ±13V Minimum Output Swing into 500Ω
■ ±3.2V Minimum Output Swing into 150Ω
■ 4.5V/mV Minimum DC Gain, RL=1k
■ 60ns Settling Time to 0.1%, 10V Step
■ 0.2% Differential Gain, AV=2, RL=150Ω
■ 0.3° Differential Phase, AV=2, RL=150Ω
■ Specified at ±2.5V, ±5V, and ±15V

APPLICATIONS

■ Wideband Amplifiers
■ Buffers
■ Active Filters
■ Video and RF Amplification
■ Cable Drivers
■ Data Acquisition Systems