STM32F030F4P6

STM32F030F4P6 Description

The STM32F030x4/x6/x8/xC microcontrollers have a high-performance ARM® Cortex®-M0 32-bit RISC core running at 48 MHz, high-speed embedded storage (up to 256 Kbytes of Flash memory and up to 32 Kbytes of SRAM), and a comprehensive set of upgraded peripherals and I/Os. All devices include standard communication interfaces (up to two I2Cs, two SPIs, and six USARTs), a 12-bit ADC, seven general-purpose 16-bit timers, and an advanced-control PWM timer.
The STM32F030x4/x6/x8/xC microcontrollers run from a 2.4 to 3.6V power supply in the temperature range of -40 to +85 °C. A diverse range of power-saving settings enables the development of low-power applications.

STM32F030F4P6 Features

• Core: ARM® 32-bit Cortex®-M0 CPU, frequency up to 48 MHz
• CRC calculation unit
• Memories
– 16 to 256 Kbytes of Flash memory
– 4 to 32 Kbytes of SRAM with HW parity
• Reset and power management
– Digital & I/Os supply: VDD = 2.4 V to 3.6 V
– Analog supply: VDDA = VDD to 3.6 V
– Power-on/Power down reset (POR/PDR)
– Low power modes: Sleep, Stop, Standby
• Up to 55 fast I/Os
– All mappable on external interrupt vectors
– Up to 55 I/Os with 5V tolerant capability
• 5-channel DMA controller
• Clock management
– 4 to 32 MHz crystal oscillator
– 32 kHz oscillator for RTC with calibration
– Internal 8 MHz RC with x6 PLL option
– Internal 40 kHz RC oscillator
• 11 timers
– One 16-bit advanced-control timer for six-channel PWM output
– Up to seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding
– Independent and system watchdog timers
– SysTick timer
• One 12-bit, 1.0 µs ADC (up to 16 channels)
– Conversion range: 0 to 3.6 V
– Separate analog supply: 2.4 V to 3.6 V
• Calendar RTC with alarm and periodic wakeup from Stop/Standby
• Serial wire debug (SWD)
• All packages ECOPACK®2
• Communication interfaces
– Up to two I2C interfaces
– Fast Mode Plus (1 Mbit/s) support on one or two I/Fs, with 20 mA current sink
– SMBus/PMBus support (on single I/F)
– Up to six USARTs supporting master synchronous SPI and modem control; one with auto baud rate detection
– Up to two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames