Description

The AT90S2313-10SC is a low-power CMOS 8-bit microcontroller based on the AVR RISC architecture. It is designed to achieve high processing speed while optimizing power consumption. This microcontroller features an AVR core with a rich instruction set and 32 general-purpose working registers. With its efficient architecture, it achieves throughputs up to ten times faster than conventional CISC microcontrollers.

Specifications and features

- Utilizes the AVR RISC Architecture - High-performance and Low-power RISC Architecture - 118 Powerful Instructions - Most Single Clock Cycle Execution - 32 x 8 General Purpose Working Registers - Up to 10 MIPS Throughput at 10 MHz - 2K Bytes of In-System Programmable Flash Endurance: 1,000 Write/Erase Cycles - 128 Bytes of SRAM - 128 Bytes of In-System Programmable EEPROM Endurance: 100,000 Write/Erase Cycles - Programming Lock for Flash Program and EEPROM Data Security - One 8-bit Timer/Counter with Separate Prescaler - One 16-bit Timer/Counter with Separate Prescaler, Compare, Capture Modes, and 8-, 9-, or 10-bit PWM - On-chip Analog Comparator - Programmable Watchdog Timer with On-chip Oscillator - SPI Serial Interface for In-System Programming - Full Duplex UART - Low-power Idle and Power-down Modes - External and Internal Interrupt Sources - Low-power, High-speed CMOS Process Technology - Fully Static Operation - Power Consumption at 4 MHz, 3V, 25°C: - Active: 2.8 mA - Idle Mode: 0.8 mA - Power-down Mode: less than 1 µA - 15 Programmable I/O Lines - 20-pin PDIP and SOIC Packages - Operating Voltages: - 2.7 - 6.0V (AT90S2313-4) - 4.0 - 6.0V (AT90S2313-10) - Speed Grades: - 0 - 4 MHz (AT90S2313-4) - 0 - 10 MHz (AT90S2313-10)

Application Scenarios

The AT90S2313-10SC microcontroller can be used in various applications such as: - Embedded systems - Internet of Things (IoT) devices - Robotics - Consumer electronics - Industrial automation - Automotive systems

Comparison

- Low-power consumption - High processing speed - Large instruction set - Rich feature set for peripheral communication and control

- Limited number of I/O lines compared to some other microcontrollers