Description

The 29LV800BA-90PFTN is an electronic component model in the IC Chips product category. It is a 8M-bit, 3.0 V-only Flash memory that is organized as 1M bytes of 8 bits each or 512K words of 16 bits each. The device is designed to be programmed in-system with the standard system 3.0 V VCC supply. It does not require 12.0 V VPP and 5.0 V VCC for write or erase operations. The 29LV800BA-90PFTN can also be reprogrammed in standard EPROM programmers.

Specifications and features

- Single 3.0 V read, program, and erase, minimizing system level power requirements

- Compatible with JEDEC-standard commands, using the same software commands as E2PROMs

- Compatible with JEDEC-standard world-wide pinouts, available in 48-pin TSOP(I), 44-pin SOP, and 48-ball FBGA packages

- Minimum 100,000 program/erase cycles, ensuring high durability and longevity

- High performance with a maximum access time of 70 ns

- Sector erase architecture, allowing for concurrent erasure of multiple sectors and full chip erase

- Boot Code Sector Architecture for easy identification of sectors

- Embedded EraseTM Algorithms for automatic pre-programming and erasing of the chip or any sector

- Embedded ProgramTM Algorithms for automatic writing and verification of data at specified address

- Data Polling and Toggle Bit feature for detection of program or erase cycle completion

- Ready/Busy output (RY/BY) for hardware detection of program or erase cycle completion

- Automatic sleep mode for power-saving when addresses remain stable

- Low VCC write inhibit ≤ 2.5 V

- Erase Suspend/Resume feature for suspending the erase operation and allowing a read in another sector within the same device

- Sector protection with a hardware method to disable any combination of sectors from program or erase operations

- Sector Protection set function by Extended sector Protect command

- Temporary sector unprotection via the RESET pin

Application Scenarios

The 29LV800BA-90PFTN is commonly used in various electronic systems that require Flash memory for data storage and retrieval. It can be used in systems such as consumer electronics, industrial equipment, automotive applications, and more.

Comparison

- High durability with minimum 100,000 program/erase cycles

- Low power requirements with single 3.0 V read, program, and erase

- Compatibility with JEDEC-standard commands and pinouts

- Sector erase architecture for efficient erasure of sectors

- Embedded EraseTM and ProgramTM Algorithms for automated programming and erasing

- Ready/Busy output for easy cycle completion detection

- Automatic sleep mode for power-saving

- Sector protection for enhanced security

- Requires additional equipment for programming and erasing beyond in-system programming