Description

The SJA1000T is a stand-alone controller for the Controller Area Network (CAN) used within automotive and general industrial environments. It is the successor of the PCA82C200 CAN controller (BasicCAN) from Philips Semiconductors.

Specifications and features

• Pin compatibility to the PCA82C200 stand-alone CAN controller
• Electrical compatibility to the PCA82C200 stand-alone CAN controller
• PCA82C200 mode (BasicCAN mode is default)
• Extended receive buffer (64-byte FIFO)
• CAN 2.0B protocol compatibility (extended frame passive in PCA82C200 compatibility mode)
• Supports 11-bit identifier as well as 29-bit identifier
• Bit rates up to 1 Mbits/s
• PeliCAN mode extensions
• Error counters with read/write access
• Programmable error warning limit
• Last error code register
• Error interrupt for each CAN-bus error
• Arbitration lost interrupt with detailed bit position
• Single-shot transmission (no re-transmission)
• Listen only mode (no acknowledge, no active error flags)
• Hot plugging support (software driven bit rate detection)
• Acceptance filter extension (4-byte code, 4-byte mask)
• Reception of 'own' messages (self-reception request)
• 24 MHz clock frequency
• Interfaces to a variety of microprocessors
• Programmable CAN output driver configuration
• Extended ambient temperature range (-40 to +125°C)

Application Scenarios

The SJA1000T can be used in various applications such as automotive systems and general industrial environments where Controller Area Network (CAN) communication is required.

Comparison

- Pin compatibility with the PCA82C200 stand-alone CAN controller

- Extended receive buffer of 64 bytes

- Supports both 11-bit and 29-bit identifiers

- Bit rates up to 1 Mbits/s

- Wide ambient temperature range (-40 to +125°C)

- Requires interfaces to a variety of microprocessors