P8315AD

Product Details

__

PRODUCT OVERVIEW

S3C8-SERIES MICROCONTROLLERS

Samsungs S3C8 series of 8-bit single-chip CMOS microcontrollers offers a fast and efficient CPU, a wide range of integrated peripherals, and various mask- programmable ROM sizes. Among the major CPU features are:

— Efficient register-oriented architecture

— Selectable CPU clock sources
— Idle and Stop power-down mode release by interrupt
— Built-in basic timer with watchdog function

A sophisticated interrupt structure recognizes up to eight interrupt levels. Each level can have one or more interrupt sources and vectors. Fast interrupt processing (within a minimum of four CPU clocks) can be assigned to specific interrupt levels.

S3C831B MICROCONTROLLER

The S3C831B single-chip microcontroller are fabricated using the highly advanced CMOS process. Its design is based on the powerful SAM88RC CPU core. Stop and idle (power-down) modes were implemented to reduce power consumption.
The S3C831B is a microcontroller with a 64K-byte mask-programmable ROM embedded. The S3P831B is a microcontroller with a 64K-byte one-time- programmable ROM embedded. Using the SAM88RC modular design approach, the following peripherals were integrated with the SAM88RC CPU core:

— Large number of programable I/O ports (Total 72 pins)

— PLL frequency synthesizer
— 16-bits intermediate frequency counter
— Two synchronous SIO modules
— Two 8-bit timer/counters
— One 16-bit timer/counter
— Low voltage reset
— A/D converter with 8 selectable input pins

FEATURES

CPU
• SAM88RC CPU core

Memory

• 2576-byte internal register file (including LCD display RAM)
• 64K-byte internal program memory area

Instruction Set

• 78 instructions
• Idle and Stop instructions

72 I/O Pins

• 32 normal I/O pins
• 40 pins sharing with LCD segment signals

Interrupts

• 8 interrupt levels and 17 internal sources
• Fast interrupt processing feature

8-Bit Basic Timer

• Watchdog timer function
• 4 kinds of clock source

Timer/Counter 0

• Programmable 8-bit internal timer
• External event counter function
• PWM and capture function

Timer/Counter 1

• Programmable 8-bit interval timer
• External event counter function

Timer/Counter 2

• Programmable 16-bit interval timer
• External event counter function

Watch Timer

• Interval Time: 50ms, 0.5s, 1.0s at 4.5 MHz
• 1/1.5/3/6 kHz buzzer output selectable

Analog to Digital Converter

• 8-channel analog input
• 8-bit conversion resolution

Two 8-bit Serial I/O Interface

• 8-bit transmit/receive mode
• 8-bit receive mode
• Selectable baud rate or external clock source

PLL Frequency Synthesizer

• VIN level: 300mVpp (minimum)
• AMVCO range: 0.5 MHz–30 MHz (3-bit counter added)
• FMVCO range: 30 MHz–150 MHz

16-Bit Intermediate Frequency (IF) Counter

• VIN level: 300mVPP (minimum)
• AMIF range: 100 kHz–1 MHz
• FMIF range: 5 MHz–15 MHz

LCD Controller/Driver

• 40 segments and 4 common terminals
• 4/3/2 common and static selectable
• Internal or external resistor circuit for LCD bias

Low Voltage Reset (LVR)

• Low voltage check to make system reset
• VLVR: 2.4V, 3.7 V selectable

Two Power-Down Modes

• Idle mode: only CPU clock stops
• Stop mode: system clock and CPU clock stop

Oscillation Source

• Crystal or ceramic for system clock (fx)

Instruction Execution Time

• 444 ns at 9.0 MHz (minimum)

Operating Temperature Range

• –25 °C to +85 °C

Operating Voltage Range

• 2.2V to 5.5V at 0.4 MHz – 4.5 MHz
• 4.0 V to 5.5 V at 0.4 MHz–9.0 MHz
• 2.5V to 3.5V, 4.5 V to 5.5 V in PLL/IFC block

Package Type

• 100-QFP-1420C, 100-TQFP-1414