TDA8034AT

General description

The TDA8034T/TDA8034AT is a cost-effective analog interface for asynchronous and synchronous smart cards operating at 5 V or 3 V. Using few external components, the TDA8034T/TDA8034AT provides all supply, protection and control functions between a smart card and the microcontroller.

Features and benefits

■ Integrated circuit smart card interface in an SO16 package
■ 5 V or 3 V smart card supply
■ One protected half-duplex bidirectional buffered I/O line (C7)
■ VCC regulation:
◆ 5 V ± 5 % or 3 V ± 5 % using two low ESR multilayer ceramic capacitors: one of 220 nF and one of 470 nF
◆ current spikes of 40 nA/s (VCC = 5 V and 3 V) or 15 nA/s (VCC =1.8 V) up to 20 MHz, with controlled rise and fall times and filtered overload detection of approximately 120 mA
■ Thermal and short-circuit protection for all card contacts
■ Automatic activation and deactivation sequences triggered by a short- circuit, card take-off, overheating, falling VDD, VDD(INTF) or VDDP
■ Enhanced card-side ElectroStatic Discharge (ESD) protection of > 6 kV
■ External clock input up to 26 MHz connected to pin XTAL1
■ Card clock generation up to 20 MHz using pin CLKDIV1 with synchronous frequency changes of:
◆ 1∨2 fxtal or 1∨4 fxtal on TDA8034T
◆ fxtal or 1∨2 fxtal on TDA8034AT
■ Non-inverted control of pin RST using pin RSTIN
■ Compatible with ISO 7816, NDS and EMV 4.2 payment systems
■ Supply supervisor for killing spikes during power on and off:
◆ using a fixed threshold
◆ using an external resistor bridge with threshold adjustment
■ Built-in debouncing on card presence contacts (typically 4.5 ms)
■ Multiplexed status signal using pin OFFN

Applications

■ Pay TV
■ Electronic payment