
⚠ All product names, trademarks, brands, and logos on this site are the property of their respective owners. Their use is for identification purposes only and does not imply any affiliation or authorization from the rights holders. We are not authorized dealers or distributors of the brand. The warranty is provided by us, not the original manufacturer.
FDC37C673QFP
FDC37C673QFP - Brand New SMSC IC Chips
- One-month free return and one year warranty.
- Full or Partial Refund, if the item is not as described
- Full Refund if you don't receive your order
General Description
The FDC37C672 with Consumer IR and IrDA v1.1 support incorporates a keyboard interface, SMSCs true CMOS 765B floppy disk controller, advanced digital data separator, two 16C550 compatible UARTs, one Multi-Mode parallel port which includes ChiProtect circuitry plus EPP and ECP, on-chip 24 mA AT bus drivers, two floppy direct drive support, Intelligent power management and SMI support. The true CMOS 765B core provides 100% compatibility with IBM PC/XT and PC/AT architectures in addition to providing data overflow and underflow protection. The SMSC advanced digital data separator incorporates SMSCs patented data separator technology, allowing for ease of testing and use. Both on-chip UARTs are compatible with the NS16C550. The parallel port is compatible with IBM PC/AT architecture, as well as IEEE 1284 EPP and ECP. The FDC37C672 incorporates sophisticated power control circuitry (PCC). The PCC supports multiple low power down modes.
Product Features
▪ 5 Volt Operation
▪ PC98/99 and ACPI 1.0 Compliant
▪ ISA Plug-and-Play Compatible Register Set
▪ Intelligent Auto Power Management
− Shadowed Write-Only Registers for ACPI Compliance
▪ System Management Interrupt, Watchdog Timer
▪ 2.88MB Super I/O Floppy Disk Controller
− Licensed CMOS 765B Floppy Disk Controller
− Software and Register Compatible with SMSCs Proprietary 82077AA Compatible
Core
− Supports Two Floppy Drives Directly
− Configurable Open Drain/Push-Pull Output Drivers
− Supports Vertical Recording Format
− 16-Byte Data FIFO
− 100% IBM Compatibility
− Detects All Overrun and Underrun Conditions
− Sophisticated Power Control Circuitry (PCC) Including Multiple Powerdown
Modes for Reduced Power Consumption
− DMA Enable Logic
− Data Rate and Drive Control Registers
− 480 Address, Up to Eight IRQ and Three DMA Options
▪ Floppy Disk Available on Parallel Port Pins
▪ Enhanced Digital Data Separator
− 2 Mbps, 1 Mbps, 500 Kbps, 300 Kbps, 250 Kbps Data Rates
− Programmable Precompensation Modes
▪ Keyboard Controller
− 8042 Software Compatible
− 8 Bit Microcomputer
− 2k Bytes of Program ROM
− 256 Bytes of Data RAM
− Four Open Drain Outputs Dedicated for Keyboard/Mouse Interface
− Asynchronous Access to Two Data Registers and One Status Register
− Supports Interrupt and Polling Access
− 8-Bit Counter Timer
− Port 92 Support
− 8042 P12 and P16 Outputs
▪ Serial Ports
− Two Full Function Serial Ports
− High Speed NS16C550A Compatible UARTs with Send/Receive 16-Byte FIFOs
− Supports 230k and 460k Baud Programmable Baud Rate Generator Modem Control
Circuitry
− 480 Address and Eight IRQ Options
▪ Infrared Port
− Multiprotocol Infrared Interface
− 128-Byte Data FIFO
− IrDA 1.1 Compliant
− TEMIC/HP Module Support
− Consumer IR
− SHARP ASK IR
− 480 Address, Up to Eight IRQ and Three DMA Options
▪ Multi-Mode Parallel Port with ChiProtect
− Standard Mode IBM PC/XT, PC/AT, and PS/2 Compatible Bidirectional Parallel
Port
− Enhanced Parallel Port (EPP) Compatible - EPP 1.7 and EPP 1.9 (IEEE 1284
Compliant)
− IEEE 1284 Compliant Enhanced Capabilities Port (ECP)
− ChiProtect Circuitry for Protection Against Damage Due to Printer Power-On
− 480 Address, Up to Eight IRQ and Three DMA Options
▪ ISA Host Interface
− 16-Bit Address Qualification
− 8-Bit Data Bus
− IOCHRDY for ECP and Fast IR
− Three 8-Bit DMA Channels
− Eight Direct Parallel IRQs
− Serial IRQ Option Compatible with Serialized IRQ Support for PCI Systems
▪ 100 Pin QFP and TQFP Packages
Shipping
| First item | Additional item | Service | Description |
|---|---|---|---|
| $0.00 | Free | Free Shipping | Estimated 15-30 business days via Registered Air Mail or others |
| $27.50 | Free | Expedited Shipping | Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx. |
| $0.00 | Free | Buyer cooperating carrier | Using buyer's cooperating carrier. Buyer should create a shipping label and share it to us. And then we will call carrier for pickup |
| $38.00 | Free | Expedited Shipping | Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx. |
Delivery
- The transportation time may be delayed due to customs clearance, local holidays or abnormal events.
- The estimated time is based on the fastest speed provided by commercial couriers (DHL, FedEx, UPS etc).
- The estimated time does not include the lead time of the item. The lead time of most items is 2–5 business days. If more than 5 working days are needed, we will manually confirm with you.
| Flag | Country | Express Delivery | Standard Delivery |
|---|---|---|---|
| United States | 3 - 5 days | 10-15 days | |
| Canada | 3 - 5 days | 10-20 days | |
| Mexico | 3 - 5 days | 10-17 days | |
| Germany | 3 - 5 days | 10-12 days | |
| Italy | 3 - 5 days | 10-15 days | |
| United Kingdom | 3 - 5 days | 10-12 days |
Estimated Delivery
This item requires 2-5 business days for processing before shipping after payment is confirmed. And depending on the destination and shipping method.
Return Policy
| Return window | Refund type | Return shipping |
|---|---|---|
| 60 days after receiving item | Money Back or Replacement | Buyer pays for return shipping |