JM1AN-TMP-DC48V

FEATURES

• Compact, high-capacity, and
resistant to inductive loads
The relay is a compact 16×30.4×26.5 mm
.630×1.197×1.043 inch. It can control an
inductive load (cosϕ = 0.7) with inrush
current of 70 A and steady state current of
20 A.
• Excellent contact welding resistance
High contact pressure, a forced opening
mechanism, and a forced wiping
mechanism realizes an excellent contact
welding resistance.
• High breakdown voltage and surge
resistant relay
More than 6.4 mm .252 inch maintained
for the insulation distance between contacts
and coil, and the breakdown voltage
between contacts and coil is 5,000 V for 1
minute. In addition, the surge resistance
between contacts and coil is greater than
10,000 V.
• Resistant to external force
An absorber mechanism is used on the
load terminals, giving a large improvement
in characteristics variations caused
by the external force during FASTON
placement/removal.
• Flux resistance mechanism
The terminal area is plugged with resin to
prevent flux seepage during PCB mounting. (TMP type)
• Conforms to the various safety standards
UL, CSA approved.
TÜV, VDE under application.
• The line up can support economical
mounting methods.
The relay are equipped with a drive terminal
(coil terminal) on one side for PCBs,
and a load terminal (tab terminal #250) on
the reverse side. The line up includes the
TM type which can be attached directly to
the PCB composing a drive circuit, and
the TMP type which supports economical
wiring. The TMP type can also be directly
attached, and a high capacity load can be
wired to the tab terminal.