CS42L52CNZ

General Description

The CS42L52 is a highly integrated, low power stereo CODEC with headphone and Class D speaker amplifiers. The CS42L52 offers many features suitable for low power, portable system applications.

Stereo CODEC

♦ High Performance Stereo ADC & DAC
– 98 dB Dynamic Range (A-wtd)
– -88 dB THD+N
♦ Flexible Stereo Analog Input Architecture
– 4:1 Analog Input MUX
– Analog Input Mixing
– Analog Passthru with Volume Control
– Analog Programmable Gain Amplifier (PGA)
♦ Programmable Automatic Level Control (ALC)
– Noise Gate for Noise Suppression
– Programmable Threshold & Attack/Release Rates
♦ Dual MIC Inputs
– Differential or Single-Ended
– +16 dB to +32 dB w/1dB step MIC PreAmplifiers
– Programmable, Low Noise MIC Bias Levels
♦ Digital Signal Processing Engine
– Bass & Treble Tone Control, De-Emphasis
– Master Vol. and Independent PCM SDIN + ADC SDOUT Mix Volume Control
– Soft-Ramp & Zero-Cross Transitions
– Programmable Peak-Detect and Limiter
– Beep Generator w/Full Tone Control

Class D Stereo/Mono Speaker Amplifier

♦ No External Filter Required
♦ High Stereo Output Power at 10% THD+N
– 2 x 1.00 W into 8 Ω @ 5.0 V
– 2 x 550 mW into 8 Ω @ 3.7 V
– 2 x 230 mW into 8 Ω @ 2.5 V
♦ High Mono Output Power at 10% THD+N
– 1 x 1.90 W into 4 Ω @ 5.0 V
– 1 x 1.00 W into 4 Ω @ 3.7 V
– 1 x 350 mW into 4 Ω @ 2.5 V
♦ Direct Battery Powered Operation
– Battery Level Monitoring & Compensation
♦ 82% Efficiency at 800 mW
♦ Phase-Aligned PWM Output Reduces Idle Channel Current
♦ Spread Spectrum Modulation
♦ Low Quiescent Current

Stereo Headphone Amplifier

♦ Ground Centered Outputs
– No DC-Blocking Capacitors Required
– Integrated Negative Voltage Regulator
♦ High Power Output at -75 dB THD+N
– 2 x 23 mW Into 16 Ω @ 1.8 V
– 2 x 44 mW Into 16 Ω @ 2.5 V

System Features

♦ 12, 24, and 27 MHz Master Clock Support in Addition to Typical Audio Clock Rates
♦ High Performance 24-bit Converters
– Multi-bit Delta Sigma Architecture
– Very Low 64Fs Oversampling Clock Reduces Power Consumption
♦ Low Power Operation
– Stereo Analog Passthru: 10 mW @ 1.8 V
– Stereo Playback: 14 mW @ 1.8 V
– Stereo Rec. and Playback: 23 mW @ 1.8 V
♦ Variable Power Supplies
– 1.8 V to 2.5 V Digital & Analog
– 1.6 V to 5 V Class D Amplifier
– 1.8 V to 2.5 V Headphone Amplifier
– 1.8 V to 3.3 V Interface Logic
♦ Power Down Management
– ADC, DAC, CODEC, MIC Pre-Amplifier, PGA, Headphone Amplifier, Speaker Amplifier
♦ Analog & Digital Routing/Mixes:
– Line/Headphone Out = Analog In (ADC Bypassed)
– Line/Headphone/Speaker Out = ADC + Digital In
– Digital Out = ADC + Digital In
– Internal Digital Loopback
– Mono Mixes
♦ Flexible Clocking Options
– Master or Slave Operation
– High Impedance Digital Output Option (for easy MUXing between CODEC & other data sources)
– Quarter-Speed Mode - (i.e. allows 8 kHz Fs while maintaining a flat noise floor up to 16 kHz)
– 4 kHz to 96 kHz Sample Rates
♦ I²C® Control Port Operation
♦ Temp. Monitor w/Thermal Foldback & Shutdown
♦ Headphone/Speaker Detection Input
♦ Pop and Click Suppression

Applications

♦ Digital Voice Recorders, Digital Cameras & Camcorders
♦ PDA’s
♦ Personal Media Players
♦ Portable Game Consoles