MIC5801YWM

MIC5801YWM Description

The MIC5800/5801 latched drivers are high-voltage, high current integrated circuits comprised of four or eight CMOS data latches, a bipolar Darlington transistor driver for each latch, and CMOS control circuitry for the common CLEAR, STROBE, and OUTPUT ENABLE functions.
The bipolar/MOS combination provides an extremely low-power latch with maximum interface flexibility. MIC5800 contains four latched drivers; MIC5801 contains eight latched drivers.
The MIC5801YWM is a 8-bit parallel-input Latched Driver with a 5V supply, it will typically operate at better than 5MHz. The latched driver is a high- voltage, high-current integrated circuit consisting of four or eight CMOS data latches, a bipolar Darlington transistor driver for each latch, and CMOS control circuitry for the common CLEAR, STROBE, and OUTPUT ENABLE functions. The bipolar/MOS combination yields an extremely low-power latch with maximum interface flexibility. This device greatly improves data input rates. Significantly higher speeds are obtained with a 12V supply. The CMOS inputs are compatible with standard CMOS, PMOS, and NMOS circuits. Pull-up resistors may be required in TTL or DTL circuits. It has open-collector outputs and integral diodes for inductive load transient suppression. The output transistors can sink 500mA and maintain at least 50V in the OFF state.

MIC5801YWM Features

• 4.4MHz Minimum Data Input Rate
• High-Voltage, Current Sink Outputs
• Output Transient Protection
• CMOS, PMOS, NMOS, and TTL Compatible Inputs
• Internal Pull-Down Resistors
• Low-Power CMOS Latches

MIC5801YWM Applications

Motor Drive & Control