EPM3032ALI44-10N

General Description

MAX 3000A devices are low–cost, high–performance devices based on the Altera MAX architecture.

Features...
■ High–performance, low–cost CMOS EEPROM–based programmable
logic devices (PLDs) built on a MAX® architecture (see Table 1)
■ 3.3-V in-system programmability (ISP) through the built–in
IEEE Std. 1149.1 Joint Test Action Group (JTAG) interface with
advanced pin-locking capability
– ISP circuitry compliant with IEEE Std. 1532
■ Built–in boundary-scan test (BST) circuitry compliant with
IEEE Std. 1149.1-1990
■ Enhanced ISP features:
– Enhanced ISP algorithm for faster programming
– ISP_Done bit to ensure complete programming
– Pull-up resistor on I/O pins during in–system programming
■ High–density PLDs ranging from 600 to 10,000 usable gates
■ 4.5–ns pin–to–pin logic delays with counter frequencies of up to
227.3 MHz
■ MultiVoltTM I/O interface enabling the device core to run at 3.3 V,
while I/O pins are compatible with 5.0–V, 3.3–V, and 2.5–V logic
levels
■ Pin counts ranging from 44 to 256 in a variety of thin quad flat pack
(TQFP), plastic quad flat pack (PQFP), plastic J–lead chip carrier
(PLCC), and FineLine BGATM packages
■ Hot–socketing support
■ Programmable interconnect array (PIA) continuous routing structure
for fast, predictable performance
■ Industrial temperature range (Continue ...)