
⚠ All product names, trademarks, brands, and logos on this site are the property of their respective owners. Their use is for identification purposes only and does not imply any affiliation or authorization from the rights holders. We are not authorized dealers or distributors of the brand. The warranty is provided by us, not the original manufacturer.
AD8306AR
AD8306AR - Brand New Analog Devices Special Purpose Amplifiers
- One-month free return and one year warranty.
- Full or Partial Refund, if the item is not as described
- Full Refund if you don't receive your order
PRODUCT DESCRIPTION
The AD8306 is a complete IF limiting amplifier, providing both an accurate
logarithmic (decibel) measure of the input signal (the RSSI function) over a
dynamic range of 100 dB, and a programmable limiter output, useful from 5 MHz
to 400 MHz.
It is easy to use, requiring few external components. A single supply voltage
of +2.7 V to +6.5 V at 16 mA is needed, corresponding to a power consumption
of under 50 mW at 3 V, plus the limiter bias current, determined by the
application and typically 2 mA, providing a limiter gain of 90 dB when using
200 Ω loads. A CMOS-compatible control interface can enable the AD8306 within
about 500 ns and disable it to a standby current of under 1 µA.
The six cascaded amplifier/limiter cells in the main path have a small signal
gain of 12.04 dB (×4), with a –3 dB bandwidth of 850 MHz, providing a total
gain of 72 dB. The programmable output stage provides a further 18 dB of gain.
The input is fully differential and presents a moderately high impedance (1 kΩ
in parallel with 2.5 pF). The input-referred noise-spectral-density, when
driven from a terminated 50 Ω, source is 1.28 nV/√Hz, equivalent to a noise
figure of 3 dB. The sensitivity of the AD8306 can be raised by using an input
matching network.
Each of the main gain cells includes a full-wave detector. An additional four
detectors, driven by a broadband attenuator, are used to extend the top end of
the dynamic range by over 48 dB.
FEATURES
Complete, Fully Calibrated Log-Limiting IF Amplifier
100 dB Dynamic Range: –91 dBV to +9 dBV
Stable RSSI Scaling Over Temperature and Supplies:
20 mV/dB Slope, –95 dBm Intercept
60.4 dB RSSI Linearity up to 200 MHz
Programmable Limiter Gain and Output Current
Differential Outputs to 10 mA, 2.4 V p-p
Overall Gain 90 dB, Bandwidth 400 MHz
Constant Phase (Typical 656 ps Delay Skew)
Single Supply of +2.7 V to +6.5 V at 16 mA Typical
Fully Differential Inputs, RIN = 1 kV, CIN = 2.5 pF
500 ns Power-Up Time, <1 mA Sleep Current
APPLICATIONS
Receivers for Frequency and Phase Modulation
Very Wide Range IF and RF Power Measurement
Receiver Signal Strength Indication (RSSI)
Low Cost Radar and Sonar Signal Processing
Instrumentation: Network and Spectrum Analyzers
Shipping
| First item | Additional item | Service | Description |
|---|---|---|---|
| $0.00 | Free | Free Shipping | Estimated 15-30 business days via Registered Air Mail or others |
| $27.50 | Free | Expedited Shipping | Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx. |
| $0.00 | Free | Buyer cooperating carrier | Using buyer's cooperating carrier. Buyer should create a shipping label and share it to us. And then we will call carrier for pickup |
| $38.00 | Free | Expedited Shipping | Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx. |
Delivery
- The transportation time may be delayed due to customs clearance, local holidays or abnormal events.
- The estimated time is based on the fastest speed provided by commercial couriers (DHL, FedEx, UPS etc).
- The estimated time does not include the lead time of the item. The lead time of most items is 2–5 business days. If more than 5 working days are needed, we will manually confirm with you.
| Flag | Country | Express Delivery | Standard Delivery |
|---|---|---|---|
| United States | 3 - 5 days | 10-15 days | |
| Canada | 3 - 5 days | 10-20 days | |
| Mexico | 3 - 5 days | 10-17 days | |
| Germany | 3 - 5 days | 10-12 days | |
| Italy | 3 - 5 days | 10-15 days | |
| United Kingdom | 3 - 5 days | 10-12 days |
Estimated Delivery
This item requires 2-5 business days for processing before shipping after payment is confirmed. And depending on the destination and shipping method.
Return Policy
| Return window | Refund type | Return shipping |
|---|---|---|
| 60 days after receiving item | Money Back or Replacement | Buyer pays for return shipping |