Chipdatas
UDN2987LWTR-6-T
UDN2987LWTR-6-T UDN2987LWTR-6-T - Brand New ALLEGRO Power Distribution Switches
Get Quote
Buy Now

UDN2987LWTR-6-T

UDN2987LWTR-6-T - Brand New ALLEGRO Power Distribution Switches

Manufacturer Part No: UDN2987LWTR-6-T In Stock
MOQ: 1pcs
Condition
Quantity
Shipping:
Free ShippingEstimated 15-30 business days via Registered Air Mail or othersSee details
Delivery:
Estimated between Mon, May 11 and Wed, May 13.This item requires 2-5 business days for processing before shipping after payment is confirmed. And depending on the destination and shipping method.See details
Return:
60 days returns. Buyer pays for return shippingSee details
Payments:
PayPalVisaMastercardAmexBank Transfer Credit Card
Shop with confidence
  • One-month free return and one year warranty.
  • Full or Partial Refund, if the item is not as described
  • Full Refund if you don't receive your order
Contact us
ManufacturerALLEGRO
Product CategoryPower Distribution Switches, Load Drivers
Series-
PackagingAlternate Packaging
Package-Case20-SOIC (0.295", 7.50mm Width)
Input-TypeNon-Inverting
Operating-Temperature-20°C ~ 85°C (TA)
Output-TypeBipolar
FeaturesStatus Flag
InterfaceOn/Off
Supplier-Device-Package20-SOIC W
Ratio of output to input1899/12/30 1:01:00
Number-of-Outputs8 Outputs
Voltage-Supply-Vcc-VddNot Required
Fault-ProtectionCurrent Limiting (Fixed), Over Temperature
Output-ConfigurationHigh Side
Rds-On-Typ-
Voltage-Load4.75 V ~ 35 V
Current-Output-Max350mA
Switch-TypeGeneral Purpose

Description

Providing overcurrent protection for each of its eight sourcing outputs, the UDN2987LW-6 driver is used as an interface between standard low-level logic and relays, motors, solenoids, LEDs, and incandescent lamps. This device includes thermal shutdown and output transient protection/clamp diodes for use with sustaining voltages to 35 V.

In this driver, each channel includes a latch to turn off that channel if the maximum channel current is exceeded. All channels are disabled if the thermal shutdown is activated. A common FAULT output is used to indicate either chip thermal shutdown or any overcurrent condition. All outputs are enabled by pulling the common OE/R input high. When OE/R¯ is low, all outputs are inhibited and the eight latches are reset. The OE/R¯ function can be especially important during power-up, in preventing floating inputs from turning on the outputs.

Under normal operating conditions, each of eight outputs will source in excess of 100 mA continuously at an ambient temperature of 25°C and a supply of 35 V. The overcurrent fault circuit will protect the device from short-circuits to ground with supply voltages of up to 30 V.

The inputs are compatible with 5 and 12 V logic systems: TTL, Schottky TTL, DTL, PMOS, and CMOS. In all cases, the output is switched ON by an active high input level. Compared to predecessor devices, the UDN2987LW-6 has a significantly faster TPHL (200 ns typical) and a lower driver supply voltage rating (4.75 V), which allows the use of 5 V logic.

The UDN2987LW-6 is supplied in a 20-lead small-outline (SOIC-W) plastic package. All packages are lead (Pb) free, with 100% mattetin leadframe plating.

Features

▪ 4.75 to 35 V driver supply voltage
▪ Output enable-disable (OE/R)
▪ 350 mA output source current
▪ Overcurrent protected
▪ Internal ground clamp diodes
▪ Output Breakdown Voltage 35 V minimum
▪ TTL, DTL, PMOS, or CMOS compatible inputs
▪ Internal Thermal Shutdown (TSD)

Shipping

Item location:China
Ships to:Worldwide
First item Additional item Service Description
$0.00 Free Free Shipping Estimated 15-30 business days via Registered Air Mail or others
$27.50 Free Expedited Shipping Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx.
$0.00 Free Buyer cooperating carrier Using buyer's cooperating carrier. Buyer should create a shipping label and share it to us. And then we will call carrier for pickup
$38.00 Free Expedited Shipping Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx.
Please contact us if need

Delivery

  • The transportation time may be delayed due to customs clearance, local holidays or abnormal events.
  • The estimated time is based on the fastest speed provided by commercial couriers (DHL, FedEx, UPS etc).
  • The estimated time does not include the lead time of the item. The lead time of most items is 2–5 business days. If more than 5 working days are needed, we will manually confirm with you.
FlagCountryExpress DeliveryStandard Delivery
United StatesUnited States3 - 5 days10-15 days
CanadaCanada3 - 5 days10-20 days
MexicoMexico3 - 5 days10-17 days
GermanyGermany3 - 5 days10-12 days
ItalyItaly3 - 5 days10-15 days
United KingdomUnited Kingdom3 - 5 days10-12 days

Estimated Delivery

Estimated between Mon, May 11 and Wed, May 13.

This item requires 2-5 business days for processing before shipping after payment is confirmed. And depending on the destination and shipping method.

Return Policy

Return window Refund type Return shipping
60 days after receiving item Money Back or Replacement Buyer pays for return shipping
Recensioni verificate

Recensioni reali di acquirenti su componenti elettronici.

99.8% positivoFeedback da eBay
Cart RFQ Wishlist Email Telegram WhatsApp Youtube Chat
Cart (0 Items)
empty

Your cart is empty

RFQ List (0 Items)
empty

No inquiry items yet