
⚠ All product names, trademarks, brands, and logos on this site are the property of their respective owners. Their use is for identification purposes only and does not imply any affiliation or authorization from the rights holders. We are not authorized dealers or distributors of the brand. The warranty is provided by us, not the original manufacturer.
A49LF040ATL-33F
A49LF040ATL-33F - Brand New AMIC IC Chips
- One-month free return and one year warranty.
- Full or Partial Refund, if the item is not as described
- Full Refund if you don't receive your order
General Description
The A49LF040A flash memory device is designed to be read-compatible with the Intel Low Pin Count (LPC) Interface Specification 1.1. This device is designed to use a single low voltage, range from 3.0 Volt to 3.6 Volt power supply to perform in-system or off-system read and write operations. It provides protection for the storage and update of code and data in addition to adding system design flexibility through five general-purpose inputs. Two interface modes are supported by the A49LF040A: Low Pin Count (LPC) Interface mode for In-System programming and Address/Address Multiplexed (A/A Mux) mode for fast factory programming of PC-BIOS applications.
FEATURES
• Single Power Supply Operation
- Low voltage range: 3.0 V - 3.6 V for Read and Write Operations
• Standard Intel Low Pin Count Interface
- Read compatible to Intel® Low Pin Count (LPC) interface
• Memory Configuration
- 512K x 8 (4 Mbit)
• Block Architecture
- 4Mbit: eight uniform 64KByte blocks
- Supports full chip erase for Address/Address Multiplexed (A/A Mux) mode
• Automatic Erase and Program Operation
- Embedded Byte Program and Block/Chip Erase algorithms
- Typical 10 µs/byte programming time
- Typical 1s block erase time
• Two Operational Modes
- Low Pin Count Interface (LPC) Mode for in-system operation
- Address/Address Multiplexed (A/A Mux) Interface Mode for programming
equipment
• Low Pin Count (LPC) Mode
- 33 MHz synchronous operation with PCI bus
- 5-signal communication interface for in-system read and write operations
- Standard SDP Command Set
- Data Polling (I/O7) and Toggle Bit (I/O6) features
- Block Locking Register for all blocks
- 4 ID pins for multi-chip selection
- 5 GPI pins for General Purpose Input Register
- TBL pin for hardware write protection to Boot Block
- WP pin for hardware write protection to whole memory array except Boot
Block
• Address/Address Multiplexed (A/A Mux) Mode
- 11-pin multiplexed address and 8-pin data I/O interface
- Supports fast programming on EPROM programmers
- Standard SDP Command Set
- Data Polling (I/O7) and Toggle Bit (I/O6) features
• Lower Power Consumption
- Typical 12mA active read current
- Typical 24mA program/erase current
• High Product Endurance
- Guarantee 100,000 program/erase cycles for each block
- Minimum 20 years data retention
• Compatible Pin-out and Packaging
- 32-pin (8 mm x 14 mm) TSOP (TYPE I)
- 32-pin PLCC
- Optional Pb-free (Lead-free) package
- All Pb-free (Lead-free) products are RoHS compliant
Shipping
| First item | Additional item | Service | Description |
|---|---|---|---|
| $0.00 | Free | Free Shipping | Estimated 15-30 business days via Registered Air Mail or others |
| $27.50 | Free | Expedited Shipping | Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx. |
| $0.00 | Free | Buyer cooperating carrier | Using buyer's cooperating carrier. Buyer should create a shipping label and share it to us. And then we will call carrier for pickup |
| $38.00 | Free | Expedited Shipping | Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx. |
Delivery
- The transportation time may be delayed due to customs clearance, local holidays or abnormal events.
- The estimated time is based on the fastest speed provided by commercial couriers (DHL, FedEx, UPS etc).
- The estimated time does not include the lead time of the item. The lead time of most items is 2–5 business days. If more than 5 working days are needed, we will manually confirm with you.
| Flag | Country | Express Delivery | Standard Delivery |
|---|---|---|---|
| United States | 3 - 5 days | 10-15 days | |
| Canada | 3 - 5 days | 10-20 days | |
| Mexico | 3 - 5 days | 10-17 days | |
| Germany | 3 - 5 days | 10-12 days | |
| Italy | 3 - 5 days | 10-15 days | |
| United Kingdom | 3 - 5 days | 10-12 days |
Estimated Delivery
This item requires 2-5 business days for processing before shipping after payment is confirmed. And depending on the destination and shipping method.
Return Policy
| Return window | Refund type | Return shipping |
|---|---|---|
| 60 days after receiving item | Money Back or Replacement | Buyer pays for return shipping |