MXC62026MP

Product Details

__

[ MEMSIC, Inc. ]

GENERAL DESCRIPTION

The MXC6202G/H/M/N are low cost, dual axis accelerometers fabricated on a standard, submicron CMOS process. It is a complete sensing system with on-chip mixed signal processing and integrated I2C bus, allowing the device to be connected directly to a microprocessor eliminating the need for A/D converters or timing resources. The MXC6202G/H/M/N measures acceleration with a full- scale range of ±2 g and a sensitivity of 512counts/g (G/M) or 128counts/g (H/N) @3.0 V at 25°C. It can measure both dynamic acceleration (e.g. vibration) and static acceleration (e.g. gravity). The MXC6202G/H/M/N design is based on heat convection and requires no solid proof mass.

FEATURES

RoHS compliant
I2C Slave, FAST (≤400 KHz.) mode interface
1.8V compatible IO
Embedded Power up/down and self-test function
On-chip temperature sensor available
Eight customer defined 7-bit addresses
2.7 V to 3.6 V single supply continuous operation
Monolithic CMOS IC
Low power consumption: typically <2 mA @ 3.0 V
Resolution better than 1 milli-g
On chip mixed signal processing

50,000 g shock survival rating
Low profile LCC package: 5mm X 5mm X 1.55mm

APPLICATIONS

Information Appliances – Cell Phones, PDA’s, Computer Peripherals, Mouse, Smart Pens
Consumer – LCD Projectors, Pedometers, Blood Pressure Monitor, Digital Cameras
Gaming – Joystick/RF Interface/Menu Selection/Tilt Sensing
GPS – Electronic Compass Tilt Correction, Dead Reckoning Assist