MG73P030-041

DESCRIPTION

Oki’s 0.25µm Application-Specific Integrated Circuit (ASIC) products are available in both Sea Of Gates (SOG) and Customer Structured Array (CSA) architectures. Both the SOG-based MG115P series and the CSA-based MG75P series use a five-layer metal process on 0.25µm drawn (0.18µm L-effective) CMOS technology. The SOG MG113P/114P series uses the same SOG base-array architecture as the MG115P series, but offers four and three metal layers, respectively. The MG73P/74P CSA series uses three and four metal layers, respectively. The semiconductor process is adapted from Oki’s production- proven 64-Mbit DRAM manufacturing process.

FEATURES

• 0.25µm drawn 3-, 4-, and 5-layer metal CMOS
• Optimized 2.5-V core
• Optimized 3-V I/O
• SOG and CSA architecture availability
• 77-ps typical gate propagation delay (for a 4x drive inverter gate with a fanout of 2 and 0 mm of wire, operating at 2.5 V)
• Over 5.4M raw gates and 868 I/O pads using 60µ staggered I/O
• User-configurable I/O with VSS, VDD, TTL, 3-state, and 1- to 24-mA options
• Slew-rate-controlled outputs for low-radiated noise
• H-clock tree cells which reduces the maximum skew for clock signals
• Low 0.2µW/MHz/gate power dissipation
• User-configurable single- and dual-port memories
• Specialized IP cores and macrocells including 32-bit ARM7TDMI CPU, phase- locked loop (PLL), and peripheral component interconnect (PCI) cells
• Floorplanning for front-end simulation, back end layout controls, and link to synthesis
• Joint Test Action Group (JTAG) boundary scan and scan path Automatic Test Pattern Generation (ATPG)
• Support for popular CAE systems including Cadence, IKOS, Mentor Graphics, Model Technology, Inc. (MTI), Synopsys, and Viewlogic