LA6505

Overview

The LA6505 is a six-channel driver for CD and MD players and recorders.
It adopts direct PWM drive output in the spindle motor drive to minimize heat generation at high spindle speeds. It also features a soft switching function that minimizes spindle motor drive noise by making the current changes at each phase switch more gradual.
The sled motor driver implements two-phase stepping drive and supports direct PWM inputs. The LA6505 uses a BTL amplifier design for the focus and tracking driver blocks, and a similar design for the loading driver as well.

Functions

(1) Spindle motor driver block
• Three-phase brushless motor driver
• Adopts a current feedback direct PWM drive design
• Supports analog inputs and features a V-type control amplifier
• Built-in oscillator circuit (The oscillator frequency can be set with an external capacitor.)
• Soft-switching drive
• FG output for one phase (the U phase)
• Built-in reverse rotation prevention circuit
• Built-in Hall sensor power supply (npn transistor, open collector output)
• Current limiter setting function (The limit is set by the resistor RF.)
• Standby mode (SS) function that operates for the spindle driver and BTL amplifiers.
(2) Sled motor driver block
• Adopts a current feedback direct PWM drive design
• Supports stepping motors
• Muting function (MUTE-SLD; only applies to the sled driver)
(3) Sled motor driver block
• BTL amplifier based design
• Built-in input operational amplifiers
• Built-in level shifting circuits
• Standby mode (SS) function
(4) Loading block
• BTL amplifier based design
• Muting function (MUTE-LOAD; only applies to the loading driver)
(5) Other circuits
• Built-in thermal shutdown circuit (design guarantee)