LH28F400SUE-NF70

DESCRIPTION

The LH28F400SU-NC is a high performance 4M (4,194,304) block erasable non- volatile random access memory organized as either 256K × 16 or 512K × 8. The LH28F400SU-NC includes thirty-two 16K (16,384) blocks. A chip memory map is shown in Figure 5.
The implementation of a new architecture, with many enhanced features, will improve the device operating characteristics and results in greater product reliability and ease of use.

Among the significant enhancements of the LH28F400SU-NC:

• 5 V Read, Write/Erase Operation (5 V VCC, VPP)
• Low Power Capability
• Improved Write Performance
• Dedicated Block Write/Erase Protection
• Command-Controlled Memory Protection Set/Reset Capability

FEATURES

• User-Configurable x8 or x16 Operation
• 5 V Write/Erase Operation (5 V VPP)
– No Requirement for DC/DC Converter to Write/Erase
• 60 ns Maximum Access Time
(VCC = 5.0 V ± 0.25 V)
• 80ns Maximum Access Time
(VCC = 5.0 V ± 0.5 V)
• 32 Independently Lockable Blocks (16K)
• 100,000 Erase Cycles per Block
• Automated Byte Write/Block Erase
– Command User Interface
– Status Register
– RY»/BY» Status Output
• System Performance Enhancement
– Erase Suspend for Read
– Two-Byte Write
– Full Chip Erase
• Data Protection
– Hardware Erase/Write Lockout during Power Transitions
– Software Erase/Write Lockout
• Independently Lockable for Write/Erase
on Each Block (Lock Block and Protect Set/Reset)
• 5 µA (Typ.) ICC in CMOS Standby
• 0.2 µA (Typ.) Deep Power-Down
• State-of-the-Art 0.45 µm ETOX™ Flash Technology
• 56-Pin, 1.2 mm × 14 mm × 20 mm TSOP (Type I) Package
• 48-Pin, 1.2 mm × 12 mm × 18 mm TSOP (Type I) Package
• 44-Pin, 600-mil SOP Package