Chipdatas
MAX2112ETI+
MAX2112ETI+ MAX2112ETI+ - Brand New Maxim Integrated RF Receivers
Get Quote
Buy Now

MAX2112ETI+

MAX2112ETI+ - Brand New Maxim Integrated RF Receivers

Manufacturer Part No: MAX2112ETI+ In Stock
MOQ: 1pcs
Category: RF Receivers
Condition
Quantity
Shipping:
Free ShippingEstimated 15-30 business days via Registered Air Mail or othersSee details
Delivery:
Estimated between Mon, May 4 and Wed, May 6.This item requires 2-5 business days for processing before shipping after payment is confirmed. And depending on the destination and shipping method.See details
Return:
60 days returns. Buyer pays for return shippingSee details
Payments:
PayPalVisaMastercardAmexBank Transfer Credit Card
Shop with confidence
  • One-month free return and one year warranty.
  • Full or Partial Refund, if the item is not as described
  • Full Refund if you don't receive your order
Contact us
ManufacturerMaxim Integrated
Product CategoryRF Receivers
SeriesMAX2112
TypeSatellite
PackagingTube Alternate Packaging
Mounting-StyleSMD/SMT
Package-CaseQFN-EP-28
Frequency925MHz ~ 2.175GHz
Operating-Temperature-40°C ~ 85°C
Sensitivity-
Features-
ApplicationsDigital TV, CATV, Set Top Boxes
Voltage-Supply3.13 V ~ 3.47 V
Supplier-Device-Package28-TQFN (5x5)
Memory Capacity-
Data-InterfacePCB, Surface Mount
Data-Rate-Max-
Modulation-or-Protocol-
Current-Receiving100mA
Antenna-ConnectorPCB, Surface Mount
Maximum Operating Temperature+ 70 C
Operating temperature range0 C
Operating-Supply-Voltage3.3 V
Bus-Type2-Wire I2C
Maximum-Frequency2175 MHz
Operating-Supply-Current100 mA
Modulation-TechniquePSK
Software Development KitMAX2112EVKIT+
NF-Noise-Figure8 dB
Part-#-AliasesMAX2112
Supply-Voltage-Max3.47 V
Supply-Voltage-Min3.13 V
Minimum-Frequency925 MHz

General Description

The MAX2112 low-cost, direct-conversion tuner IC is designed for satellite set-top and VSAT applications. The IC is intended for 8PSK and Digital Video Broadcast (DVB-S2) applications.
The MAX2112 directly converts the satellite signals from the LNB to baseband using a broadband I/Q downconverter. The operating frequency range extends from 925MHz to 2175MHz.
The device includes an LNA and an RF variable-gain amplifier, I and Q downconverting mixers, and baseband lowpass filters with programmable cutoff frequency control and digitally controlled baseband variable-gain amplifiers. Together, the RF and baseband variable-gain amplifiers provide more than 80dB of gain control range. The IC is compatible with virtually all DVB-S2 demodulators.
The MAX2112 includes fully monolithic VCOs, as well as a complete fractional-N frequency synthesizer. Additionally, an on-chip crystal oscillator is provided along with a buffered output for driving additional tuners and demodulators. Synthesizer programming and device configuration are accomplished with a 2-wire serial interface. The IC features a VCO autoselect (VAS) function that automatically selects the proper VCO. For multituner applications, the device can be configured to have one of two 2-wire interface addresses. A low-power standby mode is available whereupon the signal path is shut down while leaving the reference oscillator, digital inter face, and buffer circuits active, providing a method to reduce power in single and multituner applications.

Features

♦ 925MHz to 2175MHz Frequency Range
♦ Monolithic VCO
Low Phase Noise: -97dBc/Hz at 10kHz
No Calibration Required
♦ High Dynamic Range: -75dBm to 0dBm
♦ Integrated Variable BW LP Filters: 4MHz to 40MHz
♦ Single +3.3V ±5% Supply
♦ Low-Power Standby Mode
♦ Address Pin for Multituner Applications
♦ Differential I/Q Interface
♦ I2C 2-Wire Serial Interface
♦ Very Small 28-Pin TQFN Package

Applications

DirecTV and Dish Network DBS
DVB-S2
VSATs

Shipping

Item location:China
Ships to:Worldwide
First item Additional item Service Description
$0.00 Free Free Shipping Estimated 15-30 business days via Registered Air Mail or others
$27.50 Free Expedited Shipping Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx.
$0.00 Free Buyer cooperating carrier Using buyer's cooperating carrier. Buyer should create a shipping label and share it to us. And then we will call carrier for pickup
$38.00 Free Expedited Shipping Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx.
Please contact us if need

Delivery

  • The transportation time may be delayed due to customs clearance, local holidays or abnormal events.
  • The estimated time is based on the fastest speed provided by commercial couriers (DHL, FedEx, UPS etc).
  • The estimated time does not include the lead time of the item. The lead time of most items is 2–5 business days. If more than 5 working days are needed, we will manually confirm with you.
FlagCountryExpress DeliveryStandard Delivery
United StatesUnited States3 - 5 days10-15 days
CanadaCanada3 - 5 days10-20 days
MexicoMexico3 - 5 days10-17 days
GermanyGermany3 - 5 days10-12 days
ItalyItaly3 - 5 days10-15 days
United KingdomUnited Kingdom3 - 5 days10-12 days

Estimated Delivery

Estimated between Mon, May 4 and Wed, May 6.

This item requires 2-5 business days for processing before shipping after payment is confirmed. And depending on the destination and shipping method.

Return Policy

Return window Refund type Return shipping
60 days after receiving item Money Back or Replacement Buyer pays for return shipping
Verified Buyer Reviews

Verified buyer reviews for electronic components and industrial control products.

99.8% PositiveeBay and repeat-order buyer feedback
Cart RFQ Wishlist Email Telegram WhatsApp Youtube Chat
Cart (0 Items)
empty

Your cart is empty

RFQ List (0 Items)
empty

No inquiry items yet