527ILM

DESCRIPTION

The ACT5270 is a highly integrated superscalar microprocessor that implements a superset of the MIPS IV Instruction Set Architecture(ISA). It has a high performance 64-bit integer unit, a high throughput, fully pipelined 64-bit floating point unit, an operating system friendly memory management unit with a 48-entry fully associative TLB, a 16 KByte 2-way set associative instruction cache, a 16 KByte 2-way set associative data cache, and a high-performance 64-bit system interface with support for an optional external secondary cache. The ACT5270 can issue both an integer and a floating point instruction in the same cycle.

Features

■ Full militarized QED RM5270 microprocessor
■ Dual Issue superscalar microprocessor - can issue one integer and one floating-point instruction per cycle
● 133, 150, 200 MHz operating frequencies – Consult Factory for latest speeds
● 260 Dhrystone2.1 MIPS
● SPECInt95 5.0, SPECfp95 5.3
■ High performance system interface compatible with RM5260, R4600, R4700 and R5000
● 64-bit multiplexed system address/data bus for optimum price/ performance with up to 100 MHz operating frequency
● High performance write protocols maximize uncached write bandwidth
● Supports clock divisors (2, 3, 4, 5, 6, 7, 8)
● 5V compatible I/O’s
● IEEE 1149.1 JTAG boundary scan
■ Integrated on-chip caches
● 16KB instruction - 2 way set associative
● 16KB data - 2 way set associative
● Virtually indexed, physically tagged
● Write-back and write-through on per page basis
● Pipeline restart on first double for data cache misses
■ Integrated memory management unit
● Fully associative joint TLB (shared by I and D translations)
● 48 dual entries map 96 pages
● Variable page size (4KB to 16MB in 4x increments)
■ Integrated secondary cache controller (R5000 compatible)
● Supports 512K or 2MByte block write-through secondary
■ High-performance floating point unit
● Single cycle repeat rate for common single precision operations and some double precision operations
● Two cycle repeat rate for double precision multiply and double precision combined multiply-add operations
● Single cycle repeat rate for single precision combined multiplyadd operation
■ MIPS IV instruction set
● Floating point multiply-add instruction increases performance in signal processing and graphics applications
● Conditional moves to reduce branch frequency
● Index address modes (register + register)
■ Embedded application enhancements
● Specialized DSP integer Multiply-Accumulate instruction and 3 operand multiply instruction
● I and D cache locking by set
● Optional dedicated exception vector for interrupts
■ Fully static CMOS design with power down logic
● Standby reduced power mode with WAIT instruction
● 6 Watts typical at 3.3V 200 MHz
■ 208-lead CQFP, cavity-up package (F17)
■ 208-lead CQFP, inverted footprint (F24), Intended to duplicate the commercial QED footprint
■ 179-pin PGA package (Future Product) (P10)