HD64530SCP

Overview

The HD64570 serial communications adaptor (SCA) converts parallel data to serial data for communication with other devices. Its two independent, full- duplex transceivers support both synchronous (bit-synchronous or byte- synchronous) and asynchronous communication. Extensive protocol functions are provided.
The SCA chip provides FIFO transmit and receive buffers with 32 stages each and a four-channel direct memory access controller (DMAC) with chained-block transfer facilities, enabling high speed transfer of data between SCA and memory. A built-in bus arbiter and 16-bit bus interface support high- performance system designs.

Features

• Data transfer rate: 50 bits/s to 7.1 Mbits/s (f = 10 MHz),
50 bits/s to 12 Mbits/s (f = 16.7 MHz)
50 bits/s to 5.7 Mbits/s (f = 8 MHz)
• Protocol support
Asynchronous (ASYNC): 5 to 8 bits + parity
Byte synchronous (COP): bisync, X.21, DDCMP, etc.
_ Bit synchronous (BOP): frame relay, HDLC, SDLC, X.25 link level (LAPB), LAPD etc.
• Highly efficient data transfer: two 32-byte FIFOs (transmit/receive) per channel
• Error detection: parity (asynchronous)
CRC-16, CRC-CCITT (byte- and bit-synchronous)
™SDLC is a trademark of International Business Machine.
Transmission codes: NRZ, NRZI, FM0, FM1, Manchester
Operating modes: normal operating mode (full-duplex), auto echo, local loop back
DMA transfer: on-chip DMAC with four channels and chained-block transfer capability
Address space: 16 Mbytes
Bus interface: connects to 64180-, 8086-, and 68000-system 8-/16-bit MPU buses
Timers: time-out detection, etc.
Power supply: 5 V ± 10% (−20 to 75°C) for 10-MHz chip,
5 V ± 5% (0 to 70°C) for 16.7-MHz chip
5 V ± 10% (−40 to 85°C) for 8-MHz chip