MC9S12XEP100MAG

MC9S12XEP100MAG Description

The MC9S12XEP100MAG is a 16-bit Microcontroller based on enhanced HCS12X CPU with CISC architecture operates at a maximum frequency of 50MHz. The device incorporates 1000kB internal flash, 64kB internal RAM, 4kB EEPROM, 24-channel 12-bit A/D converter and 119 general-purpose I/O pins. This device also features peripherals like two inter-integrated circuit (IIC) bus module, three multi-scalable controller area networks (MSCAN) CAN 2.0 A/B software compatible modules, eight serial communications interface (SCI) and three serial peripheral interface modules (SPI). The MC9S12XE family features an enhanced version of the performance-boosting XGATE co-processor which is programmable in C language and runs at twice the bus frequency of the S12X with an instruction set optimized for data movement, logic and bit manipulation instructions and which can service any peripheral module on the device.

MC9S12XEP100MAG Features

COP watchdog
Real time interrupt
Clock monitor
Clock and reset generation (CRG)
Fast wake up from STOP in self clock mode
Upward compatible with MC9S12 instruction set
Enhanced indexed addressing
Interrupt module (INT)
Module mapping control (MMC)
Debug module
Access to large data segments independent of PPAGE
Background debug mode (BDM)
Memory protection unit (MPU)
Low power loop control pierce oscillator utilizing a 4MHz to 16MHz crystal
Internally filtered, frequency modulated phase-locked-loop clock generation (IPLL)
Enhanced capture timer (ECT) - 8 x 16-bit channels for input capture or output compare
Standard timer module (TIM) - 8 x 16-bit channels for input capture or output compare
Periodic interrupt timer (PIT)
8 PWM (pulse-width modulator) channels
On-chip voltage regulator - two parallel, linear voltage regulators with bandgap reference

MC9S12XEP100MAG Applications

Industrial