
⚠ All product names, trademarks, brands, and logos on this site are the property of their respective owners. Their use is for identification purposes only and does not imply any affiliation or authorization from the rights holders. We are not authorized dealers or distributors of the brand. The warranty is provided by us, not the original manufacturer.
STTXH-83333H (8.3333MHZ)
STTXH-83333H (8.3333MHZ) - Brand New VECTRON IC Chips
- One-month free return and one year warranty.
- Full or Partial Refund, if the item is not as described
- Full Refund if you don't receive your order
FEATURES
• Monolithic SONET/SDH Transport Overhead Terminating Transceiver for use
in STS-1, STS-3 (STM-1), or STS-12 (STM-4) line interface applications.
• Operates in one of four modes: STS-1 bit serial mode, STS-1 byte serial
mode, STS-3/STM-1 byte serial mode, or STS-12/STM-4 byte serial mode.
• Provides independent control of the transmit and receive operating modes.
• Performs byte interleaved multiplexing of lower rate drop side SONET/SDH
data streams. STS-3 to STS-1, STM-4 to STM-1 and STS-12 to STS-3
multiplexing modes are supported.
• Processes byte serial data at 6.48 Mbyte/s, 19.44 Mbyte/s or 77.76 Mbyte/s
depending on the mode selected.
• Frames to the receive stream by monitoring the status of the upstream
pattern detector provided by available Serial to Parallel / Parallel to Serial
front end devices.
• Optionally inserts the framing bytes (A1, A2) and the STS identification
bytes
(C1) into the transmit stream.
• Optionally descrambles the receive STS-1, STS-3/STM-1 or STS-12/STM-4
stream. Optionally scrambles the transmit STS-1, STS-3/STM-1 or
STS-12/STM-4 stream.
• Calculates and compares the bit interleaved parity error detection codes
(B1,
B2) for the receive stream. Calculates and inserts B1 and B2 in the transmit
stream.
• Optionally inserts line far end block errors (FEBE) into the Z2 growth byte
based on received B2 errors.
• Accumulates near end errors (B1, B2) and far end errors (Z2) for
performance monitoring purposes.
• Extracts the order wire channels (E1, E2) of the receive stream and
serializes
them at 64 kbit/s. Optionally inserts the order wire channels into the
transmit
stream.
• Extracts the data communication channels (D1-D3, D4-D12) and serializes
them at 192 kbit/s (D1-D3) and 576 kbit/s (D4-D12). Optionally inserts the
data communication channels into the transmit stream.
• Extracts the section user channel (F1) and serializes it at 64 kbit/s.
Optionally
inserts the section user channel into the transmit stream.
• Extracts the automatic protection switch (APS) channel (K1, K2) and
serializes it at 128 kbit/s. Detects loss of signal (LOS), out of frame (OOF),
loss of frame (LOF), far end receive failure (FERF), line alarm indication
signal (AIS), and protection switching byte failure alarms.
• Inserts FERF and AIS in the transmit stream.
• Provides loss of signal insertion, framing pattern error insertion, and
coding
violation insertion (B1 and B2) for diagnostic purposes. Provides a transmit
and receive ring control port, allowing alarm and maintenance signal control
and status to be passed between mate STTXs for applications in ring-based
add drop multiplexers.
• Low power +5 Volt 0.8 micron CMOS with TTL/CMOS compatible inputs and
outputs.
• 208 pin copper slugged PQFP package.
APPLICATIONS
• OC-N to OC-M multiplexers
• SONET/SDH add drop multiplexers
• SONET/SDH terminal multiplexers
• Broadband ISDN user network interfaces
• ATM Transmission systems
• SONET/SDH test equipment
Shipping
| First item | Additional item | Service | Description |
|---|---|---|---|
| $0.00 | Free | Free Shipping | Estimated 15-30 business days via Registered Air Mail or others |
| $27.50 | Free | Expedited Shipping | Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx. |
| $0.00 | Free | Buyer cooperating carrier | Using buyer's cooperating carrier. Buyer should create a shipping label and share it to us. And then we will call carrier for pickup |
| $48.00 | Free | Expedited Shipping | Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx. |
| $4.50 | Free | Standard Shipping | Estimated 15-30 business days via Registered Air Mail or others |
Delivery
- The transportation time may be delayed due to customs clearance, local holidays or abnormal events.
- The estimated time is based on the fastest speed provided by commercial couriers (DHL, FedEx, UPS etc).
- The estimated time does not include the lead time of the item. The lead time of most items is 2–5 business days. If more than 5 working days are needed, we will manually confirm with you.
| Flag | Country | Express Delivery | Standard Delivery |
|---|---|---|---|
| United States | 3 - 5 days | 10-15 days | |
| Canada | 3 - 5 days | 10-20 days | |
| Mexico | 3 - 5 days | 10-17 days | |
| Germany | 3 - 5 days | 10-12 days | |
| Italy | 3 - 5 days | 10-15 days | |
| United Kingdom | 3 - 5 days | 10-12 days |
Estimated Delivery
This item requires 2-5 business days for processing before shipping after payment is confirmed. And depending on the destination and shipping method.
Return Policy
| Return window | Refund type | Return shipping |
|---|---|---|
| 60 days after receiving item | Money Back or Replacement | Buyer pays for return shipping |